期刊文献+

微小型螺旋驱动管道机器人建模与分析 被引量:7

Modeling and Analysis of Micro Screw Motion In-pipe Robot
下载PDF
导出
摘要 介绍了基于管道内径为15mm的螺旋驱动管道检测机器人的组成及工作原理,分析了其运动力学性能及在弯管内的几何约束条件。应用机械系统动力学仿真软件ADAMS,建立管道机器人的虚拟样机。通过计算机仿真得到机器人牵引力与驱动轮位置参数和尺寸参数之间的关系数据,证明了理论分析的正确性,同时为研制微小型螺旋式管道机器人提供设计依据。 The mechanism and operating principle of the robot base on screw motion for pipe inspection are presented. The motion mechanism and the geometric eonstraint in the elbow are analyzed. The software ADAMS is used to build a virtual prototype of the in-pipe robot. The relational data between the traction force of the robot and the parameters of traction wheel have been obtained with the aid of computer simulation so as to prove the correctness of the theoretical analyses, thus providing a design basis for development of micro screw motion in-pipe robots.
出处 《机械制造》 2006年第12期11-14,共4页 Machinery
基金 国家自然科学基金重点资助项目(编号:602346030)
关键词 微小机器人 管道 螺旋驱动 虚拟样机 Micro Robot Pipes Screw Motion Virtual Prototype
  • 相关文献

参考文献4

  • 1孙立宁,刘品宽,吴善强,刘涛.管内移动微型机器人研究与发展现状[J].光学精密工程,2003,11(4):326-332. 被引量:23
  • 2Linzhi Sun,Yanan Zhang,Ping Sun.Study on Robots with PZT Actuator for Small Pipe[A].In Procedings International Symposium Micro Mechatronics and Human Science[C].Nagoya,Japan,2001:149-154.
  • 3Iwao HAYASHI,Nobuyuki IWATSUKI,Shigeru Iwashina.The Running Characteristics of a Screw-principle Mierorobot in a Small Bent Pipe[A].In Procedings Sixth International Symposium Micro Machine and Human Science[C].Nagoya Japan,1995:225-228.
  • 4钱晋武,章亚男,孙麟治,苏建良,秦新捷.螺旋轮驱动的细小管内移动机器人研究[J].光学精密工程,1999,7(4):54-58. 被引量:20

二级参考文献26

  • 1HOEG H D, SLATKIN A B, BURDICK J. Biomeehanieal modeling of the small intestine as required for the design and operation of a robotic endoscope[A]. IEEE International Conference on Robotics and Automation[C]. San Francisco, USA. 2000,4 : 1599-1606.
  • 2DARIO P, CARROZZA M C, LENCIONI L, MAGNANI B, et al . A micro robotic system for colonoscopy[A].IEEE International Conference on Robotics and Automation[C]. Albuquerque, New Mexico. 1997,4:1567-1572.
  • 3PEIRS J, REYNAERTS D, VAN BRUSSEL H. Design of miniature parallel manipulators for integration in a selfpropelling endoscope[J]. Sensors and Actuators , 2000,B85:409-417.
  • 4KUMAR S, KASSIM I M, ASARI V. Design of a vision-guided microrobotic colonoscopy system[J].Advanced Robotics , 2000,14(2) :87-104.
  • 5IDDAN G, MERON G, GLUKHOVSKY A, et al. Wireless capsule endoscopy[J]. Nature,2000,25(5) :405-417.
  • 6FATIKOW S, REMBOLD U. Microsystem technology and microrobotics[A]. Springer-Verlag Berlin Heidelberg[C]. 1997. 303-361.
  • 7KLOCKE V. Trends in nanomanipulation., from nanometer to micro production line[A].8^th International Conference on New Actuator[C]. Bremen, Germany, 2002. 100-105.
  • 8ELMUSTAFA A A, LAGALLY M G. Flexural hinge guided motion nanopositioner stage for precision machining:finite element simulations[J]. Precision Engineering, 2001, 21:77-81.
  • 9HOLLIS R. Whither microrobots[A]. IEEE Seventh International Symposium on Micro Machine and Human Science[C]. 1996.9-12.
  • 10ISHIKAWA Y, KITAHARA T. Present and future of micromechatronies[A]. IEEE International Symposium on Micro Mechatronics and Human Science[C].1997.13-20.

共引文献39

同被引文献25

引证文献7

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部