期刊文献+

氢化钛的分解行为及其在制备泡沫铝中的应用 被引量:15

Decomposition Behavior of TiH_2 and Its Application to Fabricating Aluminum Foam
下载PDF
导出
摘要 测定了TiH2在不同温度下的分解曲线,从热力学和动力学的角度对TiH2的分解规律进行了研究,并分析了使用TiH2制备泡沫铝时的应用方式.结果表明TiH2的分解率随着温度的升高而逐步提高,TiH2的分解过程大致可分为三个阶段.在620~680℃范围内,TiH2在前10min分解激烈,在10~20min内TiH2的分解速度变得缓慢,在20min以后TiH2的分解逐渐趋于停滞.在700~720℃之间,TiH2在前6min内的分解速度很快,在6~10min之间分解速度降低,在10min以后分解反应出现停滞. The decomposition curves of TiH2 were determined at different temperatures, and how to decompose TiH2 was studied thermodynamically and kinetically. The way to use TiH2 as foaming agent to prepare aluminum foam was also discussed. The results showed that the decomposition rate of TiH2 increases with increasing temperature, and the decomposition process of TiH2 can be divided into three phases in a certain temperature range. In the range from 620℃ to 680℃, the decomposition of TiH2 is violent for 10min after starting, then the decomposing speed becomes slow during the next 10 min and the decomposition tends to stagnate after 20 min. In the range from 700℃ to 720℃, the decomposing speed of TiH2 becomes very rapid for 6 rain after starting, then decelerates during the next 4 min and stagnates later.
出处 《东北大学学报(自然科学版)》 EI CAS CSCD 北大核心 2007年第1期87-90,共4页 Journal of Northeastern University(Natural Science)
基金 国家高技术研究发展计划项目(2004AA33G060) 辽宁省科技攻关计划项目(2003221004)
关键词 氢化钛 分解曲线 熔体发泡 泡沫铝 制备 TiH2 decomposition curve foaming in melt aluminum foam preparation
  • 相关文献

参考文献10

  • 1Yang C C,Nakae H.Foaming characteristics control during production of aluminum alloy foam[J].Journal of Alloys and Compounds,2000,313:188-191.
  • 2Gergely V,Curran D C,Clyne T W.The FOAMCARP process:foaming of aluminium MMCs by the chalk-aluminium reaction in precursors[J].Composites Science and Technology,2003,63:2301-2310.
  • 3Kennedy A R.The effect of TiH2 heat treatment on gas release and foaming in Al-TiH2 preforms[J].Scripta Materialia,2002,47:763-767.
  • 4李光明,甘礼华,陈龙武,蒋凯雁.氢化钛的制备及其分解[J].应用化学,1998,15(1):77-79. 被引量:18
  • 5Zeppelin F V,Hirscher M,Stanzide H,et al.Desorption of hydrogen from blowing agents used for foaming metals[J].Composites Science and Technology,2003,63:2293-2300.
  • 6杨东辉,何德坪,喲钌先.氢化钛热分解反应动力学及铝合金熔体泡沫化研究[J].中国科学(B辑),2004,34(3):195-201. 被引量:15
  • 7Yang C C,Nakae H.The effects of viscosity and cooling conditions on the foamability of aluminum alloy[J].Journal of Materials Processing Technology,2003,141:202-206.
  • 8王政红,陈派明.发泡法制备泡沫铝[J].材料开发与应用,1998,13(3):30-32. 被引量:21
  • 9Akiyama S,Ueno H,Imagawa K,et al.Foamed metal and method of producing same:US,4713277[P].1987-12-15.
  • 10罗洪杰,姚广春,刘宜汉,张晓明.粉煤灰增黏制备泡沫铝材料的研究[J].东北大学学报(自然科学版),2005,26(3):274-277. 被引量:5

二级参考文献21

共引文献52

同被引文献164

引证文献15

二级引证文献56

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部