期刊文献+

一种用于升压型DC/DC变换器的低压带隙基准源 被引量:5

A Low-Voltage and Low-Power Bandgap Voltage Reference for DC/DC Converters
下载PDF
导出
摘要 设计了一种应用于升压型DC/DC转换器芯片的高精度、低电压、低功耗带隙基准电压源,包含恒定电流的偏置电路、低压低功耗的运算放大器、三极管级联的带隙基准核心电路和低压启动电路四个部分。经过理论分析和仿真模拟,采用华虹NEC的5V 0.35μm 1P4M工艺流片成,功。电路实测结果为:输出电压Vout=1.2V,温度系数12.5ppm/℃,工作电压1.3~5V,随电源电压的变化率为O.78mV/V,3V供电下功耗9μA。该带隙基准源可用于实际产品的批量生产。 A high-precision, low-voltage and low-power bandgap voltage reference source for boost DC/DC converters is presented, which contains a constant current bias circuit, a low-voltage and low-power op-amp, a bandgap reference core with BJT cascaded, and a low-voltage start-up circuit. After theoretical analysis and simulation, the circuit was fabricated in Huahong-NEC's 5 V 0. 35 μm 1P4M dual-well CZ6 process. Test results show that the circuit has an outPut voltage of 1.2 V and a temperature coefficient of 12. 5 ppm/℃. Operating from 1.3 V to 5 V supply power, the circuit consumes 14 μA of power at 3 V supply with variation rate of 0.78 mV/V.
出处 《微电子学》 CAS CSCD 北大核心 2007年第1期105-108,112,共5页 Microelectronics
关键词 CMOS带隙基准源 升压型DC/DC转换器 恒流偏置电路 CMOS bandgap Boost DC/DC converter Constant-current bias circuit
  • 相关文献

参考文献8

  • 1毕查德·拉扎维[美].模拟CMOS集成电路设计[M].陈贵灿,程军,张瑞智,等译.西安:西安交通大学出版社,2003.312-319.
  • 2Lin Y-T,Chung W-Y,Wu D-S,et al.A low voltage CMOS bandgap reference[A].The 3rd Int NEWCAS Conf[C].Québec City,Canada.2005.227-230
  • 3李树荣,李丹,王亚杰,姚素英.一种适应于低电压工作的CMOS带隙基准电压源[J].天津大学学报,2006,39(1):119-123. 被引量:4
  • 4Jiang Y-M,Lee E K F.A low voltage low 1/f noise CMOS bandgap reference[A].IEEE Int Symp Circ and Syst[C].2005.Kobe,Japan.3877 -3880.
  • 5Bendali A,Savaria Y.Low-voltage bandgap reference with temperature compensation based on a threshold voltage technique[A].IEEE Int Symp Circ and Syst[C].Scottsdale,Arizona,USA.2002.201-204.
  • 6Gunawan M,Meijer G C M,Fonderie J,et al.A curvature-corrected low-voltage bandgap reference[J].IEEE J Sol Sta Circ,1993,28 (6):667-670.
  • 7汪宁,魏同立.一种具有高电源抑制比的低功耗CMOS带隙基准电压源[J].微电子学,2004,34(3):330-333. 被引量:19
  • 8陈浩琼,高清运,秦世才.CMOS带隙电压基准的误差及其改进[J].固体电子学研究与进展,2005,25(4):531-535. 被引量:13

二级参考文献20

  • 1Regan T. Low dropout linear regulators improve automotive and battery-powered system [J]. Powerconversion and Intelligent Motion, 1990; 16 (2): 65-69.
  • 2Oguey H, Aebischer D. CMOS current reference without resistance [J]. IEEE J Sol Sta Circ, 1997;32(7): 1132-1135.
  • 3Tham K M, Nagaraj K. A low supply voltage high PS-RR voltage reference in CMOS process [J]. IEEE J Sol Sta Circ, 1995; 30(5): 586-590.
  • 4GrayPR MeyerRG.AnalysisandDesignofAnalogIntegratedCircuits[M],(2nd ed)[M].北京:电子工业出版社,2002.323-327.
  • 5AllenPE[著] 王正华[译].CMOS模拟电路设计[M].北京:科学出版社,1995.571-578.
  • 6AllenPE HolbergDR.CMOSAnalogCircuitDesign[M],(2nd ed)[M].北京:电子工业出版社,2002.153-157.
  • 7艾伦PE 霍尔博格DR 冯军 李智群 译.CMOS模拟电路设计(第2版)[M].北京:电子工业出版社,2002..
  • 8Andrea B. Op-Amps and startup circuits for CMOS bandgap reference with near 1- V Supply [ J ]. IEEE Journal of Solid-Static Circuits,2002, 37( 10):1339-1343.
  • 9格雷P R 迈耶R G 周宁华 陈幼松 译.模拟集成电路的分析和设计[M].北京:高等教育出版社,2003..
  • 10毕查德·拉丸维陈贵灿 程军 张瑞智 等译.模拟CMOS集成电路设计[M].西安:西安交通大学出版社,2003..

共引文献31

同被引文献33

引证文献5

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部