摘要
为了利用摄影测量技术提高交通事故数据采集的效率,分析了交通事故与相机标定方法的特点,提出了交通事故现场摄影测量的扩展两步相机标定方法。在扩展两步标定方法中,首先对相机进行线性标定,然后进行非线性修正,最后进行图像校正,并提出了完整的标定步骤和程序,进行了相机标定实验。扩展方法标定的结果与线性标定结果相比,最大绝对误差和相对误差分别为10.9和1.7%,最小绝对误差和相对误差分别为4.1和1.0%,表明扩展两步相机标定方法能够显著提高相机标定精度,抗噪性能稳定。
In order to improve the data collection efficiency of traffic accidents, the properties of traffic accidents and camera calibrated methods were analyzed, a extended-two-step camera calibrated method applied in traffic accident scene measurement was put forward. In the method, camera was calibrated according to linear model, then its nonlinear parameters were modified based on considering lens aberration, at last image was emendated according to new parameters, full camera calibrated steps and procedure were put forward, and an experiment of accident scene photogrammetry was done. The calibration results of the extended method and linear method show that the maximum values of absolute errors and relative errors are respectively 10. 9 and 1.7%, and the least values of them reach respectively 4. 1 and 1.0%. Obviously, the extended method has high precision and stability. 1 tab, 3 figs, 10 refs.
出处
《交通运输工程学报》
EI
CSCD
北大核心
2007年第1期81-84,共4页
Journal of Traffic and Transportation Engineering
基金
国家自然科学基金项目(50338030)
关键词
交通安全
事故现场摄影测量
相机标定
扩展两步法
traffic safety
accident scene photogrammetry
camera calibration
extended-two-step method
