期刊文献+

添加剂PVB对炭气凝胶制备工艺及结构的影响 被引量:4

EFFECTS OF ADDITIVES PVB ON THE PREPARATION AND STRUCTURE OF CARBON AEROGELS
下载PDF
导出
摘要 采用溶胶—凝胶法,以间苯二酚(R)、甲醛(F)为原料、无水碳酸钠(C)作催化剂、聚乙烯醇缩丁醛(PVB)为添加剂、无水乙醇作溶剂,通过常温常压干燥和高温炭化制备炭气凝胶。考察了中间产物有机凝胶的热解行为和催化剂浓度及PVB用量对炭气凝胶孔隙结构的影响。结果表明:PVB的加入不仅加强了有机凝胶的网络结构,使其更利于常温常压干燥,而且能够较好地调控炭气凝胶的孔径分布;在一定的PVB加入量范围内,随着PVB加入量的增加,炭气凝胶的比表面积增加,孔径分布也更加集中;催化剂浓度对炭气凝胶的比表面积及孔径分布有较大的影响,当R/C=300,PVB/R=1/10时比表面积达到最大值(386m^2/g)。 Carbon aerogels were prepared from the sol-gel polymerization of resorcinol with formaldehyde catalyzed by anhydrous sodium carbonate, followed by ambient drying and carbonization. Anhydrous ethanol and PVB (Polyvinyl Butyral)were used as solvent and additives,respectively. The influences of pyrolysis of organic aerogels,catalyst concentration and PVB content on the pore structure of carbon aerogels were investigated. The results show that the additive of PVB not only reinforces the net structure of organic aerogels,but also preferably controls the pore size distribution of carbon aerogels, in the range of PVB content,the specific surface area of carbon aerogels increases with the PVB content,and the pore size distribution gets more concentrative. Furthermore,the catalyst concentration has more efects on the specific surface area and pore size distribution of carbon aerogels. The specific surface area reaches maximum (386m^2/ g) when R/C=300 and PVB/R=1/10.
出处 《炭素》 2007年第1期3-8,共6页 Carbon
基金 湖南省自然科学基金重点资助项目(编号:01JJY1005)
关键词 炭气凝胶 有机凝胶 PVB 常温常压干燥 carbon aerogels organic aerogels PVB ambient temperature and pressure drying
  • 相关文献

参考文献11

  • 1Long J M,Dening B M,McEvoy T M,et al.Carbon aerogels with ultrathin,electroactive poly (o-methoxyaniline)coatings for high-performance electrochemical capacitors[J].J.Non-Cryst.Solids,2004,350:97-106.
  • 2Moreno-Castilla C,Maldonado-Ho'dar F J.Carbon aerogels for catalysis applications An overview[J].Carbon,2005,43(3):455-465.
  • 3Rigacci A,Marechal J C,Repoux M,et al.Preparation of polyurethane-based aerogels and xerogels for thermal superinsulation[J].J.Non-Cryst.Solids,2004,350:372-378.
  • 4Glora M,Wiener M,Petricevic R,et al.Integration of carbon aerogels in PEM fuel cells[J].J.Non-Cryst.Solids,2001,285(1-3):283-287.
  • 5Pekala R W,Kong F M.Resorcinol-formaldehyde aerogels and their carbonized derivatives[J].Polym.Prepr.,1989,30:221-223.
  • 6Pekala R W.Organic aerogels from the polycondensation of resorcinol with formaldehyde[J].J.Mater.Sci.,1989,24(9):3221-3227.
  • 7Job N,Théry A,Pirard R,et al.Carbon aerogels,cryogels and xerogels Influence of the drying method on the textural properties of porous carbon materials[J].Carbon,2005,43(12):2481-2494.
  • 8Léonard A,Job N,Blacher S,et al.Suitability of convective air drying for the production of porous resorcinol-formaldehyde and carbon xerogels[J].Carbon,2005,43(8):1808-1811.
  • 9Yamamoto T,Sugimoto T,Suzuki T,et al.Preparation and characterization of carbon cryogel microspheres[J].Carbon,2002,40(8):1345-1351.
  • 10Pekala R W Alviso C T,Kong F M,et al.Aerogels derived from multifunctional organic monomers[J].J.Non-Cryst.Solids,1992,145:90-98.

同被引文献16

  • 1Xingyan Wang, Xianyou Wang, Li Liu, et al. Preparation and characterization of carbon aerogel microspheres by an inverse, emulsion polymerization[J]. Journal of Non-Crys talline Solids, 2011 (357): 793-797.
  • 2Probstle H, Wiener M, Fricke J. Carbon aerogels for elec trochemical double layer capacitors[J]. Journal of Porous material, 2003, 10(4): 213-222.
  • 3Lin C, Ritter J A. Effect of synthesis pH on the structure of carbon xerogels[J]. Carbon, 1997, 35(9): 1271-1278.
  • 4Tamon H, Ishizaka H. SAXS study on gelation process in preparation of resorcinol-formaldehyde aerogel [J]. J Col loid Interf Sci, 1998, (206):577-582.
  • 5Yamashita Y, Ouchi K. A study on carbonization of phe nol-formaldehyde resin labeled weth deuterium and 13C. Carbon, 1981, 19(1): 89-94.
  • 6Biesmans G, Mertens A, Duffours L Woignier T, Phalippou J. Polyurethane based organic aerogels and their transfor mation into carbon aerogels.[J]J Non-Cryst Solid, 1998 (225) :64-68.
  • 7Gregg S. J, Sing K. S. W, Adsorption, Surface Area and Porosity[M], 2nd ed[J]. Academic Press London, 1982.
  • 8张玉芹,时志强,刘利,王成扬,陈明鸣.酚醛树脂基活性炭的制备及双电层电容特性[J].炭素,2008(4):18-22. 被引量:2
  • 9刘冬,沈军,李亚捷,刘念平,刘斌.碳气凝胶的孔结构及其对电化学超级电容器性能的影响[J].物理化学学报,2012,28(4):843-849. 被引量:26
  • 10刘西川,袁磊,王朝阳,付志兵,冯灏,唐永建.超高比表面积碳气凝胶常压干燥制备与结构分析[J].强激光与粒子束,2012,24(2):370-374. 被引量:4

引证文献4

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部