期刊文献+

双钢管构件由点接触到线接触的连续过渡 被引量:19

CONTINUOUS TRANSITION FROM POINT CONTACT TO LINE CONTACT BETWEEN THE AXIALLY COMPRESSED INNER CORE AND THE FLEXIBLE SLEEVE IN A SLEEVED COLUMN
下载PDF
导出
摘要 针对轴向压力作用下的双钢管构件,提出了内核与有限刚度套管之间线接触的力学计算模型。利用小挠度二阶平衡微分方程推导了内核与套管处于点接触、线接触时内核的挠度、弯矩、剪力、接触反力等物理量的计算公式。理论公式和应用算例表明,在内核与套管之间由点接触到线接触过渡时,这些物理量满足必要的连续性和协调性条件。本文提出的力学计算模型也能应用于模拟内核与刚性套管的线接触。 A mechanical model of line contact between the inner core and the sleeve with finite stiffness in a sleeved compression member under axial compression is proposed. The formulae for deflection, moment, shear and contact reaction of the inner core during point contact and line contact between the inner core and the sleeve are derived according to the second order equilibrium differential equations of small deflection. The formulae and application examples indicate that the proposed formulae satisfy essential continuity and compatibility conditions at the transition from point contact to line contact between the inner core and the sleeve. The proposed model can also be applied to simulate the line contact between the inner core and the rigid sleeve.
作者 申波 邓长根
出处 《工程力学》 EI CSCD 北大核心 2007年第2期154-160,共7页 Engineering Mechanics
基金 国家自然科学基金资助项目(50478107)
关键词 双钢管构件 轴压 线接触 点接触 约束屈曲 sleeved column axial compression line contact point contact constrained buckling
  • 相关文献

参考文献9

  • 1Uang C-M,Nakashima M.Earthquake engineering:from engineering seismology to performance-based engineering[M].USA:CRC Press,2004.
  • 2Sridhara B N.Sleeved compression member[P].USA:5175972,1993.
  • 3Prasad B K.Experimental investigation of sleeved column[A].Proc.The 33rd AIAA/ASCE structures,structural dynamics and materials conference[C].Dallas USA:AIAA/ASCE,1992.
  • 4Chai H.The post-buckling response of a bi-laterally constrained column[J].Journal of the Mechanics and Physics of Solids,1998,46(7):1155~1181.
  • 5Domokos G,Holmes P,Royce B.Constrained Euler buckling[J].Journal of Nonlinear Science,1997,7(3):281~314.
  • 6Plaut R H,Suherman S,Dillard D A,Williams B E,Watson L T.Deflections and buckling of a bent elastica in contact with a flat surface[J].International Journal of Solids and Structures,1999,36(8):1209~1229.
  • 7Holmes P,Domokos G,Schmitt J,Szeberenyi I.Constrained Euler buckling:an interplay of computation and analysis[J].Computer Methods in Applied Mechanics and Engineering,1999,170(3~4):175~207.
  • 8郭英涛,任文敏.关于限制失稳的研究进展[J].力学进展,2004,34(1):41-52. 被引量:27
  • 9刘鸿文.材料力学[M].北京:高等教育出版社,1992..

二级参考文献73

  • 1范钦珊,傅光辉,方慕真.核电站安全壳钢衬壳环的屈曲研究[J].清华大学学报(自然科学版),1996,36(4):105-110. 被引量:3
  • 2范钦珊,陈文.受圆形表面单面约束的点锚固圆环热屈曲分析[J].固体力学学报,1996,17(2):184-188. 被引量:2
  • 3范钦珊,陈文.圆形混凝土容器内点铆固圆环的热屈曲分析[J].清华大学学报(自然科学版),1996,36(3):1-5. 被引量:3
  • 4张向阳,余寿文.单侧表面约束圆板的过屈曲分析[J].清华大学学报(自然科学版),1996,36(8):6-11. 被引量:2
  • 5Chateau X, Nguyen Q S. Buckling of elastic structures in unilateral contact with or without friction. Eur J Mech,A/Solids, 1991, 10(1): 71~89
  • 6Shimizu Y, Moriwaki Y. Buckling strength of lining shells of pressure vessels. Journal of Pressure Vessel Technology,1992, 114(8): 308~314
  • 7Ory H, Hussler W. Load capacity of thin-walled prestressed vessels elastic intermediate layer. Int J Pres Ves & Piping,1985, 18:111~134
  • 8Giannakopoulos A E, Nilsson K F, Tsamasphyros G. The contact problem at delamination. Journal of Applied Mechanics, 1995, 62(11): 989~995
  • 9Comiez J M, Waas A M, Shahwan K W. Delamination buckling: experiment and analysis. International Journal of Solids and Structures, 1995, 32(6~7): 767~782
  • 10Rasheed H A, Tassoulas J T. Delamination growth in long composite tubes under external pressure. International Journal of Fracture, 2001, 108(1): 1~23

共引文献241

同被引文献126

引证文献19

二级引证文献55

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部