期刊文献+

基于仿真的机构动平衡实验台振动研究 被引量:4

Research on the vibration of dynamic balancing test-bed of mechanism based on simulation
下载PDF
导出
摘要 将机械动力学与有限元分析方法相结合,建立了机构动平衡实验台振动测量的仿真方法。通过将轴承座设为柔体,对比分析了平面四杆机构平衡前后的振动情况。通过仿真计算,有利于在设计阶段掌握机构的平衡程度,该方法对同类复杂机构的动平衡分析具有参考价值。 Let the mechanical dynamics be combined with the method of finite element analysis to establish the simulation method of vibration measurement of dynamics balancing testbed of mechanism. By means of setting the bearing pedestal as a flexible body, the vibration conditions of planar four-bar linkage before and after balance were analyzed in contrast. It is advantageous to master the equilibrium level of mechanism in the designing stage by way of simulative calculation. This method possesses value of references on the dynamic balancing analysis of the complicated mechanisms of the same kind.
出处 《机械设计》 CSCD 北大核心 2007年第2期48-50,共3页 Journal of Machine Design
基金 陕西理工学院科研基金资助项目(SLG0617)
关键词 仿真 机构 动平衡 振动 柔性体 simulation mechanism dynamic balance vibration flexible body
  • 相关文献

参考文献1

二级参考文献3

  • 1Tricamo S J,Lowen G G.Simultaneous optimization of dynamic reactions of a four-bar linkage with prescribed maximum shaking force[J].Transactions of ASME,1983,105:520-525.
  • 2Niu ming Qi,Penestri E.Optimum balancing of four-bar linkages:a refined algorithm[J].Mech.Mach.Theory,1991,26 (3):337 -348.
  • 3李哲.考虑输入速度波动的连杆机构平衡[J].机械工程学报,1997,33(4):77-82. 被引量:4

共引文献5

同被引文献16

  • 1张社民,蔡书平,陈际红.平面连杆机构综合优化平衡的振动响应法[J].西安交通大学学报,1995,29(10):68-74. 被引量:6
  • 2周骏,潘晓铭,周哲为.转子动平衡的技术研究[J].机械设计与制造,2007(4):151-153. 被引量:23
  • 3聂春戈,李晓峰,兆文忠.高速转向架轴箱转臂结构拓扑优化设计[J].机械设计,2007,24(6):58-60. 被引量:14
  • 4[德]夸特罗尼.[德]色拉瑞著,李敏波译.MATLAB科学计算[M].北京:清华大学出版社,2005.
  • 5Bagci C. Complete shaking force shaking moment balancing of link mechanisms using balancing idler loops E J ]. Trans: ASME J. Mech. Des. ,1982,104(2) :482-493.
  • 6Kochev I S. General method for active balancing of combined shanking moment and torque fluctuation in planar linkages [ J ]. Mech. Mach. Theory, 1990,25 ( 6 ) : 679 - 687.
  • 7Lee T W,Cheng C. Optimum balancing of combined shaking force, shaking moment and torque fluctuation in high-speed linkages [ J ]. Trans. ASME J. Mech. Transmiss. Automat. Des. , 1984,106:242 - 251.
  • 8机械设计手册鳊委会.机械设计手册(第五卷)[M].北京:机械工业出版社,2004.
  • 9中华人民共和国铁道部.铁路货车轮轴组装、检修及管理规则[M].北京:中国铁道出版社,2007.
  • 10Bagci C.Shaking Force and Shaking Moment Balancing of the Plane SliderCrank Mechanism [A]. Proceedings of 4th OSU Applied Mechanisms Conference,Oklahoma, 1975(25): 1-16.

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部