期刊文献+

超临界CO_2中聚碳酸酯的合成工艺 Ⅰ.制备与表征 被引量:1

Synthesis of Polycarbonate in Supercritical CO_2 I. Preparation and Characterization
下载PDF
导出
摘要 在超临界CO2条件下由双酚A和碳酸二苯酯合成了双酚A型聚碳酸酯(PC),用红外光谱(FT-IR)、核磁共振谱(1H-NMR)、凝胶渗透色谱(GPC)和差示扫描量热法(DSC)表征了PC的结构和性质。结果表明反应过程中存在线形缩聚和成环两种反应机理,产物的重均分子量高达117740,分子量分布指数Pd=1.33;超临界CO2能增塑PC致使链段活动性增强,玻璃化转变温度(Tg)降低。 A specific GC analysis method was established for the rapid quantification of the main products of liquid-phase oxidation of toluene, namely, benzaldehyde, benzyl alcohol and benzoic acid. A C,-C equipped with a FFAP capillary and a FID detector was adopted. O-nitrotoluene and dimethylphthalate were used as internal standards of benzaldehyde, benzyl alcohol and benzoic acid respectively. The results indicated that the mean recovery rate for spiked samples are 105.39%, 101.94 % ,97.18%, respectively, and the standard deviations are 3.19 %, 3.71%, 1.66 %, respectively.
出处 《天然气化工—C1化学与化工》 CAS CSCD 北大核心 2007年第1期31-34,共4页 Natural Gas Chemical Industry
基金 国家自然科学基金资助项目(20076036) 武汉工程大学湖北省新型反应器与绿色化学工艺重点实验室开放基金资助项目(200400604)
关键词 超临界 二氧化碳 聚碳酸酯 苯酚 碳酸二苯酯 GC benzaldehyde benzyl alcohol benzoic acid
  • 相关文献

参考文献13

  • 1李复生,殷金柱,魏东炜,崔金华,宋光复.聚碳酸酯应用与合成工艺进展[J].化工进展,2002,21(6):395-398. 被引量:74
  • 2杨振忠,姜振华,马荣堂.聚碳酸酯的发展[J].高分子材料科学与工程,1994,10(4):1-7. 被引量:17
  • 3钟晓萍.聚碳酸酯及其合金市场现状与展望[J].塑料工业,2006,34(B05):9-12. 被引量:9
  • 4Chunmei Shi,Joseph M DeSimone,Douglas J Kiserow,et al.Reaction kinetics of the solid-state polymerization of poly(bisphenol a carbonate) facilitated by supercritical carbon dioxide[J].Macromolecules,2001,34(22):7744-7750.
  • 5Stephen M Gross,Ramone D Givens,Mitsutoshi Jikei,et al.Synthesis and swelling of poly(bisphenol acarbonate) using supercritical CO2[J].Macromolecules 1998,31(25):9090-9092.
  • 6Stephen M Gross,Devin Flowers,George Roberts,et al.Solid-state polymerization of polycarbonates using supercritical CO2[J].Macromolecules,1999,32(9):3167-3169.
  • 7秦吉臣,谢小莉,曹贤武,瞿金平.双酚A聚碳酸酯合成新方法的研究进展[J].现代化工,2004,24(5):9-12. 被引量:15
  • 8General Electric Company.Continuous method for manufacturing polycarbonate[P].US:6 340 738B2,2002.
  • 9General Electric Company.Extrusion method for making polycarbonate[P].US:6 420 512B1,2002.
  • 10General Electric Company.Method of making polycarbonates[P].US:6 492 486B1,2002-12-10.

二级参考文献33

  • 1黄振豪.聚碳酸酯合成工艺开发的新进展[J].高分子通报,1994(4):248-254. 被引量:6
  • 2陈燕,唐小斗.聚碳酸酯合成新方法的研究进展[J].材料导报,1997,11(1):57-61. 被引量:5
  • 3Lai Y C,J Appl Polym Sci,1988年,36卷,819页
  • 4Chang T C T,1988年
  • 5钱保功,高聚物的转变与松弛,1986年
  • 6团体著者,塑料科技,1973年,3期,47页
  • 7杨焕兴,高分子学报,1964年,4期,296页
  • 8杨焕兴,高分子学报,1963年,1期,1页
  • 9安立佳
  • 10Radhakrishnan S,Iyer V S,Sivaram S[J].Polymer,1994,35(17):3789 - 3791.

共引文献94

同被引文献21

  • 1郝永卯,薄启炜,陈月明.CO_2驱油实验研究[J].石油勘探与开发,2005,32(2):110-112. 被引量:76
  • 2孙长宇,王文强,陈光进,马昌峰.注CO_2油气藏流体体系油/水和油/气界面张力实验研究[J].中国石油大学学报(自然科学版),2006,30(5):109-112. 被引量:20
  • 3杨胜来 魏俊之.油层物理学[M].北京:石油工业出版社,2004.155-158.
  • 4Masalmeh S K. The Effect of Wetability Heterogeneity on Capillary Pressure and Relative Permeability [ J ] . Journal of Petroleum Sci- ence & Engineering, 2003, 39 (3) : 399-408.
  • 5Gratton C A C, Dawe R A. Gas and Oil Production from Water Flood Residual Oil .. Effects of Wetabihty and Oil Spreading Characteristics [J] . Journal of Petroleum Science & Engineering, 2003, 39 (3) : 297-308.
  • 6Zhong Liguo, Lin Hui, Sun Yongtao, et al. Investigation on Princi- ples of Enhanced Offshore Heavy Oil Recovet'y by Co-injection of Steam with Flue Gas [ R] . SPE 165231, 2013.
  • 7Butler R. The Steam and Gas Push (SAGP) [J] . Journal of Ca- nadian Petroleum Technology, 1999, 38 (3): 54-61.
  • 8Sayegh S G, Rao D N, Kokal S, et al. Phase Behavior and Physi- cal Properties of Lindbergh Heavy Oil/CO2 Mixtures [J] . Journal of Canadian Petroleum Technology, 1990, 29 (6) : 31-39.
  • 9Rao D N, Ayirala S C, Kulkarni M M, et al. Development of Gas Assisted Gravity Drainage (GAGD) Process for Improved Light Oil Recovery [R] . SPE 89357, 2004.
  • 10马涛,汤达祯,蒋平,齐宁.注CO_2提高采收率技术现状[J].油田化学,2007,24(4):379-383. 被引量:80

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部