期刊文献+

1Cr20Co6Ni2WMoV钢热变形行为研究 被引量:2

Investigation on hot deformation behavior of 1Cr20Co6Ni2WMoV steel
下载PDF
导出
摘要 文章采用Gleeble-2000热模拟试验机对1Cr20Co6Ni2WMoV热强钢的热变形行为进行研究。变形温度为950℃,1000℃,1050℃,1100℃,1160℃,变形速率为0.01s^(-1),0.1s^(-1),1s^(-1),10s^(-1)。结果表明.1Cr20Co6Ni2WMoV钢在低应变速率热压缩变形过程中发生明显的动态再结晶;当应变速率大于10s^(-1)时,只发生动态回复。动态再结晶晶粒随变形温度降低,应变速率升高而减小。随应变速率的提高,峰值应力和峰值应变均升高。 The hot compression behavior of 1Cr20Co6Ni2WMoV heat-resisting steel is investigated over a range of temperature (950℃to 1160℃) and strain rate (0. 01s^-1 to 10s^-1 ), by isothemal compression of Gleeble-2000 machine. The results show that dynamic recrystallization occurs abovely during the samples are compressed at low strain rate. Dynamic recovery occurs when the strain rate over 10s^-1. The size of dynamic recrystallization grains decreases with reducing of deformation temperature and rising of strain rate.
出处 《塑性工程学报》 EI CAS CSCD 北大核心 2007年第2期11-15,共5页 Journal of Plasticity Engineering
关键词 1Cr20Co6Ni2WMoV热强钢 热压缩变形 流变应力 激活能 1Cr20Co6Ni2WMoV heat-resisting steel hot compression flow stress activation energy
  • 相关文献

参考文献8

  • 1韩冰,刘文娟,袁鸽成.7055铝合金高温压缩变形的流变应力[J].广东工业大学学报,2004,21(2):16-20. 被引量:6
  • 2赵忠.金属材料及热处理[M].北京:机械工业出版社,2000,10..
  • 3李雄,张鸿冰,阮雪榆,罗中华,张艳.40Cr钢流变应力的分析及模拟[J].材料工程,2004,32(11):41-44. 被引量:9
  • 4R H Wu,J T Liu, H B Chang,T Y Hsu, X Y Ruan.Prediction of the flow stress of 0. 412-1.9Cr-1.5Mn-1.0Ni-0. 2Mo steel during hot deformation[J]. Journal of Materials Processing Technology, 2001. (116) : 211-218
  • 5Hong Gao, Gary C Barber, Qi An Chen, Yuqiu Lu.High temperature deformation of a Fe-based low nickel alloy[J]. Journal of Material Processing Technology,2003. (142) :52-57
  • 6Jiantao Liu, Hongbing Chang, Ruiheng Wu, T Y Hsu,Xueyu Ruan. Investigation on hot deformation behavior of AISI T1 High-speed steel[J]. Materials Characterization,2000. (45) : 175-186
  • 7H J McQueen, N D Ryan. Constitutive analysis in hot working[J]. Materials Science and Engineering, 2002.(A322) : 43-63
  • 8徐有容,顾清,王德英,顾菊芳,瞿天才.高Mo奥氏体不锈钢动态变形力学行为研究[J].金属学报,1991,27(4). 被引量:2

二级参考文献23

  • 1Yu WANG DongLiang LIN. A correlation between tensile flow stress and Zenner-Hollomon factor in TiAl alloys at high temperatures [J]. J. Mat. Sci,2000, (19): 1185-1188.
  • 2X X YAO.The strain-rate sensitivity of flow stress and work-hardening rate in a hot deformed Al-1.0Mgalloy[J] .J.Mat.Sci,2000, (19)743-744.
  • 3J P Poirier关德林.晶体的高温塑性变形[M].大连:大连理工大学出版社,1989.24.
  • 4沈健.[D].长沙:中南工业大学,1996.
  • 5ANAND L. Constitutive equations for the rate-dependent deformation of metals at elevated temperatures [J]. Trans AIME, 1982,104: 12-17.
  • 6RAO K P, HAWBOLT E B. Development of constitutive relationships using compression testing of a medium carbon steel [J]. Trans AIME, 1992, 114: 116-123.
  • 7KLEPACZKO J R. A practical stress-strain-strain-rate temperature constitutive relation of the power form [J]. J Mech Work Tech,1987, 15: 143- 165.
  • 8BARAGAR D L. The high temperature and high strain-rate behavior of a plain carbon and an HSLA steel [J]. J Mech Work Tech, 1987,14: 295-307.
  • 9SAITO Y, ENAMI T, TANAKA T. The mathematical model of hot deformation resistance with reference to microstructure changes during rolling in plate mill [J]. Trans ISIJ, 1985, 25:1149 -1155.
  • 10LUDWIK P. Elemente der Techanologishen Mechanik [M]. Berlin:Springer-Verlag OHG, 1909.

共引文献23

同被引文献27

  • 1冯亮,曲恒磊,赵永庆,李辉,张颖楠,曾卫东.TC21合金的高温变形行为[J].航空材料学报,2004,24(4):11-13. 被引量:50
  • 2潘崇超,李殿国,凌刚,尹法杰,马天军.Fe-15Cr-25Ni高温合金热压缩变形条件下的流变应力模型[J].材料工程,2005,33(6):7-10. 被引量:3
  • 3罗德信,曾萍.马氏体不锈钢高温变形抗力研究[J].轧钢,1995,12(3):12-14. 被引量:3
  • 4曲银化,孙建科,孟祥军.TC4钛合金高温压缩变形行为的研究[J].材料开发与应用,2006,21(2):24-29. 被引量:22
  • 5蔡大勇,熊良银,孙贵东,刘文昌,姚枚.GH708高温合金热变形行为[J].稀有金属材料与工程,2006,35(A02):144-147. 被引量:15
  • 6Zhang Ying(张颖).Research on finite element simulation of sTEYR forging process(斯太尔汽车转向节模锻工艺有限元模拟研究)[D].Huhhot(呼和浩特):Inner Mongolia University(内蒙古工业大学),2009:10.
  • 7Wang Jia(王嘉).Simulation of the FEM and optimization of the technology in the process of the plastic forming of the forging(锻件塑性成型过程的有限元模拟及工艺优化)[D].Tangshan(唐山):Hebei Polytechnic University(河北理工大学),2008:24.
  • 8中国航空材料手册编辑委员会.中国航空材料手册第1卷:结构钢,不锈钢[s].北京:中国标准出版社;2002.
  • 9中国机械工程协会,中国材料研究学会,中国材料工程大典编委会.中国材料工程大典第4卷:有色金属材料工程(上)[M].北京:化学工业出版社,2005.
  • 10Han Yuanfei, Zeng Weidong, Zhao Yongqing, et al. Mode- ling of constitutive relationship of Ti-25V-15Cr-0. 25Si alloy during hot deformation process by fuzzy neural network[J]. Mater Design, 2010,31 (9) : 4380.

引证文献2

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部