期刊文献+

F40MnV非调质钢的热变形行为 被引量:8

Hot Deformation Behavior of F40MnV Steel Without Quenching-and-Tempering
下载PDF
导出
摘要 采用Gleeble 1500热模拟实验机对F40MnV非调质钢在温度为1 223-1 473 K,应变速率为0.1-10 s-1的热变形行为进行研究。通过奥氏体再结晶动力学回归计算得到了F40MnV钢的变形激活能,峰值应力和峰值应变与Zener-Hollomon参数的关系表达式。同时,得到了F40MnV钢的动态再结晶动力学方程和动态再结晶晶粒尺寸的数学模型。 Hot compression test of F40MnV without quenching-and-tempering steel was conducted on Gleeble 1500 at the temperature 1 223-1 473 K and strain rate of 0. 1- 10 s^-1 to research its hot deformation behavior. The deformation energy was caculated. The dependence of the peak stress and peak strain on Zener-Hollomon parameter was studied. The mathmatical models of volume fraciton and grain size after dynamical recrystallization were also obtained as follows.
出处 《钢铁研究学报》 CAS CSCD 北大核心 2007年第5期68-71,106,共5页 Journal of Iron and Steel Research
基金 国家自然科学基金项目(50275094)
关键词 F40MnV 非调质钢 流动应力 动态再结晶 F40MnV steel quenched and tempered steel flow st ress dynamical recrystallization
  • 相关文献

参考文献12

  • 1杨洪根,崔庆红.非调质钢在工程机械上的运用及评价[J].工程设计学报,2004,11(4):228-230. 被引量:11
  • 2王荣滨,雪浪.非调质钢在汽车工业中的应用[J].上海钢研,2002(1):31-35. 被引量:6
  • 3解振林.非调质钢的研究、应用及其最新进展[J].河北理工学院学报,2002,24(2):36-41. 被引量:10
  • 4Imbert C, Ryan N D, McQueen H J. Hot Workability of Three Grades of Tool Steel [J]. 1984,15(10):1855-1864.
  • 5Milovic R, Manojlovic D, Andjelic M. Hot Workability of M2 Type High-Speed Steel [J]. Steel Research, 1992,63 (2) : 78-84.
  • 6Karhausen K, Kopp R. Model for Integrated Process and Microstructure Simulation in Hot Forming [J]. Steel Research, 1992,63(6) :247-256.
  • 7Imbert C A C, McQueen H J. Peak Strength, Strain Hardening and Dynamic Restoration of A2 and M2 Tool Steels in Hot Deformation [J]. Materials Science and Engineering A,2001,313(1-2):88-103.
  • 8McQueen H J, Yue S, Ryan N D. Hot Working Characteristics of Steels in Austenitie State [J]. Journal of Materials Processing Technology, 1995,53( 1-2): 293-310.
  • 9Kong L X, Hodgson P D, Wang B. Development of Constitutive Models for Metal Forming With Cyclic Strain Softening [J]. Journal of Materials Processing Technology, 1999,89- 90:44-50.
  • 10Sellars C M, Whiteman J A. Recrystallization and Grain Growth in Hot Rolling [J]. Metal Science, 1979,13(3-4) : 187-194.

二级参考文献13

共引文献22

同被引文献77

引证文献8

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部