摘要
介绍了基于SolidWorks软件设计平台进行机床夹具设计的方法和关键技术。根据机床夹具的设计特点,以SolidWorks软件为平台,先建立夹具标准零件参数化实体模型库;然后针对不同夹具,二次开发出非标准件实体模型库;在通过虚拟装配得到装配体的三维实体模型后,经过图形转换和专家修改得到生产实际中应用的二维工程图。该方法有利于提高夹具设计效率,可以在机床夹具设计行业推广。
A method based on Solidworks software and key technology are platform. According to introduced for designing the the method of designing the clamp of machine tools clamp, based on Solid the solid parameter models of standard parts in the designing clamp was firstly constructed, then another solid special individual model database of non-standard parts used for the clamp designing was developed; After obtaining three -dimensional solid model of the clamp body through virtual assemble, the two-dimensional engineering drawing available was completed by implementing graphic exchange and modification by expert. It is concluded that the present method is equal to enhance the design eddiciency and quality, and should be recommend in the clamp design field.
出处
《机械设计与制造》
北大核心
2007年第7期169-171,共3页
Machinery Design & Manufacture
关键词
夹具设计
三维建模
虚拟装配
图形转换
Clamp designing
Three-dimensional modeling
Virtual assembling
Graphic exchanging
