摘要
According to new slip effects on nanopatterned interfaces, the mechanism of enhancing water injection into hydrophobic nanomaterial SiO2 was proposed. When Hydrophobic Nanoparticles（HNPs）are adsorbed on surfaces of porous walls, hydrophobic nanoparticles layers are formed instead of hydrated layer, and slip effects appear on the pore wall when a driving pressure is applied to the rock cores sample. It makes fluid to move more quickly and the flow capacity increases greatly. Experiments on changing wettability of porous walls were conducted, and the phenomenon that porous walls surfaces were adsorbed by nanoparticles was validated with the Environment Scan Electron Microscopy（ESEM）. The results of displacement experiments show that flowing resistance is greatly reduced, and water-phase effective permeability is increased by 47 % averagely after being treated by nanofluid. These results indicate that the slip effect may occur on nanoparticle film of porous walls. Based on this new mechanism of enhancing water injection about hydrophobic nanomaterial SiO2, a slip velocity model in uniform porous media was introduced, and some formulas for the ratio of slip length to radius, slip length ,stream slip velocity and flux increment were deduced. and calculated results indicate that the ratio of slip length to radius is about 3.54%-6.97%, and the slip length is about 0.024 μ m -0.063 μ m. The proposed model can give a good interpretation for the mechanisms of enhancing water injection with the HNPs.
According to new slip effects on nanopatterned interfaces, the mechanism of enhancing water injection into hydrophobic nanomaterial SiO2 was proposed. When Hydrophobic Nanoparticles（HNPs）are adsorbed on surfaces of porous walls, hydrophobic nanoparticles layers are formed instead of hydrated layer, and slip effects appear on the pore wall when a driving pressure is applied to the rock cores sample. It makes fluid to move more quickly and the flow capacity increases greatly. Experiments on changing wettability of porous walls were conducted, and the phenomenon that porous walls surfaces were adsorbed by nanoparticles was validated with the Environment Scan Electron Microscopy（ESEM）. The results of displacement experiments show that flowing resistance is greatly reduced, and water-phase effective permeability is increased by 47 % averagely after being treated by nanofluid. These results indicate that the slip effect may occur on nanoparticle film of porous walls. Based on this new mechanism of enhancing water injection about hydrophobic nanomaterial SiO2, a slip velocity model in uniform porous media was introduced, and some formulas for the ratio of slip length to radius, slip length ,stream slip velocity and flux increment were deduced. and calculated results indicate that the ratio of slip length to radius is about 3.54%-6.97%, and the slip length is about 0.024 μ m -0.063 μ m. The proposed model can give a good interpretation for the mechanisms of enhancing water injection with the HNPs.
基金
Project supported by the National Nature Science Foundation of China(Grant No. 50674065)
Shanghai Leading Academic Discipline Project(Grant No.Y0103).
