期刊文献+

电催化氧化处理蒽醌蓝模拟染料废水试验研究

Electro-catalyze Oxidation Treatment of Acid Anthraquinone Green GL Dyestuff Wastewater
下载PDF
导出
摘要 研究了pH值、槽电压、电解时间与通电方式、电解质种类及浓度对酸性蒽醌蓝模拟染料废水的电催化氧化效果。处理酸性蒽醌蓝染料废水的最佳电催化氧化条件为槽电压10V、初始pH值为4、NaCl浓度2.0g/L;在此条件下连续电解50min,COD去除率和脱色率分别为53.6%和87.9%。研究表明脉冲电催化氧化可以明显提高能量效率和电流效率,降低处理成本。 Electro-catalyze oxidation treatment of acid anthraquinone blue GL dyestuff wastewater was studied by using RuO2-Ti positive and stainless steel band negative. The influence of pH value,the voltage,electrolytic time was studied,the optimal condition was chosen.The groove voltage was 10V,the initial pH value was 4,the concentration of NaCI was 2.0g/L.After 50min electrolysis,COD removal rate was 53.6%,the color removal rate was 87.9%. The results show that impulse electro-catalyze oxidation treatment can be used to obviously improve the electric current efficiency and energy efficiency and reduce its treating cost.
出处 《长江大学学报(自科版)(上旬)》 CAS 2007年第2期32-34,共3页 JOURNAL OF YANGTZE UNIVERSITY (NATURAL SCIENCE EDITION) SCI & ENG
基金 湖北省科技攻关项目(2003AA306B01)
关键词 染料废水 电催化氧化 葸醌蓝染料 生化处理 最佳条件 dyestuff wastewater electro-catalyze oxidation biochemical treatment optimal condition
  • 相关文献

参考文献2

二级参考文献24

共引文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部