期刊文献+

原料加入温度对Al-Ti-C晶粒细化剂显微组织的影响 被引量:1

Effects of Stuff Addition Temperature on Microstructure of Al-Ti-C Master Alloy
下载PDF
导出
摘要 采用K2TiF6、石墨粉和纯铝为主要原料的原位反应方法制备了Al-Ti-C晶粒细化剂。通过光学显微镜、扫描电镜和能谱分析等方法分析了Al-Ti-C中间合金的显微组织。试验结果表明,K2TiF6和石墨粉同温下加入时,Al3Ti呈块状分布,不同温度下加入时则呈针状或长条状分布。随着K2TiF6和石墨粉加入温度的不同,Al-Ti-C中间合金中TiC粒子的生成机制也不同。 The Al-Ti-C master alloy was prepared with K2TiF6,graphite powder and pure aluminum by in-situ reaction method.Microstructure of the master alloy was observed by OM(optical microscope),SEM(scanning electron microscope) and EPMA.The results show that the bulk Al3Ti phase can be observed with the addition of K2TiF6,graphite powder at the same temperature,while the needle or long strip Al3Ti phase can be observed at different addition temperatures.In addition,the TiC particle exhibits different synthesized mechanism with different adding temperature of K2TiF6,graphite powder
出处 《特种铸造及有色合金》 CAS CSCD 北大核心 2007年第7期557-559,共3页 Special Casting & Nonferrous Alloys
基金 教育部"跨世纪优秀人才支持计划"基金资助项目(NCET-04-0778) 湘潭大学跨学科交叉项目资助项目(05IND07)
关键词 晶粒细化剂 显微组织 生成机制 Grain Refiner,Microstructure,Synthesized Mechanism
  • 相关文献

参考文献12

  • 1HOEFS P,REIF W,GREEN A H.Development of an improved AlTiC master alloy for the grain refinement of aluminum[J].Light Metals,1997(3):777-784.
  • 2WHITEHEAD A J,DANILAK S A.The development of commercial Al-3%Ti-0.15%C grain refining master alloy[J].Light Metals,1997(3):785-793.
  • 3JOHNSSON M,BACKERUD L,SIGWORTH G K.Study of the mechanism of grain refinement of Al after additions of Ti and B containing master alloys[J].Metallurgical Trans.A,1993,24:481-491.
  • 4PRASAD K V S,ARJUNA R A,DUTTA R S,et al.Effect of hot rolling on the g rain refining efficiency of Al-Ti and Al-Ti-B master alloys[J].Ⅱ FTrans,1994(4):321-326.
  • 5ARIUNA R A,MURTY B S,CHAKRABORTY M.Response of an Al-Cr alloy towards grain refinement by Al-5Ti-1B master alloy[J].Int.J.Cast Metals Res,1996(9):125-132.
  • 6BANERJI A,REIF W.Grain refinement of aluminum by TiC[J].Metallurgical Trans.,1986,A17(2):2 065-2 068.
  • 7高泽生.Al-Ti-C 晶粒细化用中间合金的最新进展[J].轻合金加工技术,1998,26(10):5-11. 被引量:27
  • 8BANERJI A,REIF W.Development of Al-Ti-C grain rRefiners containing TiC[J].Metallurgical Trans.,1986,A17(12):2 127-2 137.
  • 9蒙多尔福LF 王祝堂 张振录 郑璇.铝合金的组织与性能[M].北京:冶金工业出版社,1988..
  • 10谭敦强,黎文献,余琨,马正青,颜长舒.新一代铝合金晶粒细化剂Al-Ti-C[J].铸造,2000,49(7):388-391. 被引量:19

二级参考文献7

共引文献71

同被引文献9

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部