摘要
为了满足Φ30 mm MCP大束流短时间电子清刷新工艺要求,以轴向电子枪工作原理为基础,利用静电场对电子的作用理论,分析了电子的运动轨迹,并对电子的偏转进行了计算。根据计算结果,设计了电子枪的基本结构,确定了电子枪的各种参数:灯丝材料为Φ0.05 mm的钨(75%)铼(25%)合金丝;灯丝形状为"∨"字型;电子枪外径为Φ35 mm,高度为20 mm,最大加热功率为12.6 W时,电子发射电流密度达到1.26×10-5A/cm2。用该电子枪对4块性能相近的Φ30 mm MCP电子清刷4 h后,MCP的增益值达到500±50。这表明:用新电子枪可以代替原RUS-A型电子枪。
In order to have great electron flux for scrubbing ф30 nm microchannel plate and complete the process in less time,the trace of electron was analyzed and the electron deflection was calculated, according to the operation principle of the axial electron gun and the theory of the function of electrostatic field on electron. Based on the calculation result, the structure of the new electron gun was designed and all the parameters of the electron gun were determined, the filament material was ф0.05 mm tungsten rhenium alloy（75%, 25%）, the filament was in “V” type, the radius of the electron gun was ф35 mm and its height was 20 mm, and the current density of electron emission reached 1.26×10^-5A/cm^2 while the maximum filament heating power was 12. 6 W. The gain of the four microchannel plates reached 500±50 after being scrubbed with the electron gun for four hours. The result indicates that the old electron gun RUS-A can be replaced by the new one with better performance.
出处
《应用光学》
CAS
CSCD
2007年第5期582-586,共5页
Journal of Applied Optics
关键词
微通道板(MCP)
电子清刷用电子枪
电子枪灯丝
microchannel plate （MCP）
electron gun for electron scrubbing
filament of electron gun
