期刊文献+

有机蒙脱土的制备及对气相缓蚀剂的改性 被引量:4

Preparation of Organic Montmorillonite and Its Modification for Volatile Corrosion Inhibitor
下载PDF
导出
摘要 用十六烷基三甲基溴化铵(CTAB)、蒙脱土为原料,在80℃搅拌混合1 h,制备了有机蒙脱土。在吗啉类气相缓蚀剂合成过程中,通过添加有机蒙脱土对其进行改性,有机蒙脱土和吗啉的质量比为0.9∶20,反应时间为5h,反应温度为50℃。用密闭空间挥发减重实验、气相防锈甄别实验和气相缓蚀能力实验对改性气相缓蚀剂的性能进行了测定,结果表明,有机蒙脱土改性气相缓蚀剂的72 h密闭空间挥发失重率增加到2.5%,对碳钢的缓蚀率为94.3%。模拟大气腐蚀水的电化学极化曲线表明,当有机蒙脱土改性气相缓蚀剂的质量分数为0.5%时,将导致碳钢电极腐蚀电位正移至-0.547 8 V,腐蚀电流密度降低为4.475μA.cm-2,有机蒙脱土改善了吗啉类气相缓蚀剂的挥发能力和缓蚀性能。 Montmorillonite was modified with hexadecyltrimethyl ammonium bromide ( CTAB ) through cation-exchange reaction at 80 ℃. The organic montmorillonite (OMMT) was introduced in the synthesis of morpholinium volatile corrosion inhibitor (VCI). The best mass ratio of OMMT to morpholine is 0. 9 : 20, reaction time is 5 h, and reaction temperature is controlled below 50℃. The modified morpholinium volatile corrosion inhibitor(MVCI) showed good inhibition effect against carbon steel corrosion. The volatile weightloss ratio of MVCI increased up to 2. 5% during 72 h in closed space. The inhibition efficiency of MVCI for carbon steel is 94. 3% in the volatile inhibitor sieve test. The polarization curves showed a positive shift of corrosion potential to - 0. 547 8 V (SCE) for carbon steel electrode in stimulated atmospheric corrosion water containing 0.5% MVCI, and the corrosion current density was 4. 475μA· cm^-2
出处 《精细化工》 EI CAS CSCD 北大核心 2007年第10期1037-1040,共4页 Fine Chemicals
基金 国家自然科学基金资助项目(20576069) 上海市重点学科建设项目(P1304) 上海市曙光计划项目(05SG53)~~
关键词 有机蒙脱土 改性 气相缓蚀剂 极化曲线 挥发性 精细化工中间体 organic montmorillonite modification volatile corrosion inhibitor polarization curve volatility fine chemicals intermediate
  • 相关文献

参考文献15

二级参考文献45

  • 1熊蓉春,魏刚.热水锅炉防腐阻垢技术进展[J].管道技术与设备,1995(5):8-12. 被引量:11
  • 2汤胜文.膨润土的有机改性[J].化学世界,1996,37(2):71-72. 被引量:13
  • 3姚晓,冯玉军,李颖川.国内外气田开发中管内CO_2腐蚀研究进展[J].油气储运,1996,15(2):12-18. 被引量:36
  • 4黄红兵,杨仲熙.CT2-4水溶性油气井缓蚀剂的合成与应用研究[J].石油与天然气化工,1996,25(4):231-235. 被引量:10
  • 5Tsai Tsung-Yen, Hwang Chih-Lan, Lee Shyh-Yang. A fresh approach of modified clays for polymer/clay nanocomposites[A]. Annu Tech Conf-Soc Plast Eng[C].Brookfield center,Corm:Soc Plast Eng,2000,2412-2415.
  • 6Manias E,Touny A,Wu L,et al.Polypropylene/montmorillonite nanocomposites.Review of the synthetic routes and materials properties[J].Chem Mater,2001,13:3516-3523.
  • 7Wolf D,Fushs A,Wagenknecht U,et al.Nanocomposites of polyolefin clay hybrid[A].Proceedings of the Eurofiller’99[C].Lyon:Villeurbanne,1999,6-9.
  • 8Hatsuo Ishida, Sandi C, John B. General approach to nanocomposite preparation [J]. Chem Mater, 2000, 12(5) : 1260-1267.
  • 9Kang Jae-Hyun, Lyu Sung-Gyu, Choi Hyun-Kuk, et al.Effect of intercalant on the synthesis and properties of epoxy nanocomposite [ J ]. polymer (Korean), 2001, 25(3) :414-420.
  • 10Geralda S, Alex J H,Bryan Koene E. Effect of layered silicates on thermal characteristics of polycarbonate nanocomposites[ A]. Annu Tech conf -Soc Plast Eng[ C]. Brookfield center Corm: Soc Plast Eng, 2000,1523-1528.

共引文献115

同被引文献70

引证文献4

二级引证文献38

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部