摘要
用废玻璃粉、B2O3、ZnO和P2O5等氧化物为主要原料，研制低粘接温度的无铅环保型易熔玻璃。实验中先采用四因素三水平的正交表，对废玻璃粉添加量为30％（质量分数）的样品进行了正交实验，测定其粘接温度瓦和熔化温度Tm；并对添加MgO、CaO、Al2O3等氧化物引起的易熔玻璃瓦温度的变化进行了分析。
The study prepared a green glass that has low bonding temperature using scrap glass, B2O3, ZnO, P2o5 and other oxides. First, this experiment used orthogonal design of three level and four factors, and then added 30wt% scrap glass powders to the glass system, finally measured the bonding temperature （Ts） and the molten temperature （Tm） in the testing process. In addition, the effect of MgO, CaO and Al2O3 on Ts of the low temperature glass was tested and analyzed.
出处
《功能材料》
EI
CAS
CSCD
北大核心
2007年第A10期3860-3862,共3页
Journal of Functional Materials
关键词
易熔玻璃
无机胶粘剂
软化温度
粘接温度
low temperature glass
inorganic adhesive
softening temperature
bonding temperature
