期刊文献+

Effect of process parameters on density of magnesium alloy parts by low-pressure expendable pattern casting 被引量:1

Effect of process parameters on density of magnesium alloy parts by low-pressure expendable pattern casting
下载PDF
导出
摘要 The combination of magnesium alloys with the low-pressure expendable pattern casting(LP-EPC) process would bright future for application of magnesium alloys. The researches are focused on the effect of process parameters on the internal casting quality of magnesium alloy parts. AZ91D magnesium alloy castings were produced for different combinations of the LP-EPC process parameters. Specifically,pouring temperature,vacuum,filling velocity and coupling action of these factors were manipulated to observe their effect on the casting porosity and density distribution. The results indicate that the pouring temperature with LP-EPC process is lower than it in gravity casting. The selected process parameters,such as vacuum,filling velocity and coupled modes of them,must ensure melt metal flowing front profile exhibiting smooth and convex shape. The optimal process parameters for the castings are pouring temperature 983-1 023 K,vacuum 0.02-0.03 MPa,filling velocity 60-95 mm/s,and simultaneous filling with sucking. The combination of magnesium alloys with the low-pressure expendable pattern casting (LP-EPC) process would bright future for application of magnesium alloys. The researches are focused on the effect of process parameters on the internal casting quality of magnesium alloy parts. AZ91D magnesium alloy castings were produced for different combinations of the LP-EPC process parameters. Specifically, pouring temperature, vacuum, filling velocity and coupling action of these factors were manipulated to observe their effect on the casting porosity and density distribution. The results indicate that the pouring temperature with LP-EPC process is lower than it in gravity casting. The selected process parameters, such as vacuum, filling velocity and coupled modes of them, must ensure melt metal flowing front profile exhibiting smooth and convex shape. The optimal process parameters for the castings are pouring temperature 983-1 023 K, vacuum 0.02-0.03 MPa, filling velocity 60-95 mm/s, and simultaneous filling with sucking.
出处 《中国有色金属学会会刊:英文版》 CSCD 2007年第A01期358-362,共5页 Transactions of Nonferrous Metals Society of China
基金 Projects (50275058) supported by the National Natural Science Foundation of China
关键词 镁合金 压力 金属材料 物理特性 magnesium alloy low-pressure expendable pattern casting process parameters density
  • 相关文献

参考文献3

二级参考文献27

  • 1樊自田,吴和保,张大付,董选普,黄乃瑜.镁合金真空低压消失模铸造新技术[J].中国机械工程,2004,15(16):1493-1496. 被引量:23
  • 2张大付,樊自田,吴和保,董选普,黄乃瑜.镁合金真空低压消失模铸造充型能力的研究[J].特种铸造及有色合金,2005,25(2):115-117. 被引量:12
  • 3Liu Z L,Hu J Y,Ding W J,et al.Evaluation of the Effect of Vacuum on Mold Filling in the Magnesium EPC Process.Journal of Materials Processing Technology,2002,120:94~100.
  • 4AFS Magnesium Lost Foam Casting Committee(6-E).Genesis of a New Process:Magnesium Lost Foam Casting.Modern Casting,2003(4):26~28.
  • 5Michael M,David W,John H.Development in Lost Foam Casting of Magnesium.AFS Transaction,2003 (3):112~114.
  • 6Wu H B,Fan Z T,Huang N Y,et al.Mold Filling Characteristics of AZ91 Mg-alloy in the Low-Pressure EPC Process.Journal of Material Engineering and Performance.2005,14(1):132~135.
  • 7马图哈KH 丁道云译.非铁合金的结构和性能[M].北京:科学出版社,1999..
  • 8樊自田 董选普 黄乃瑜 等.镁(铝)合金反重力真空消失模铸造方法及设备[P].中国 发明专利:申请号02115638.7,公开号CN1382542A.2002.
  • 9Shivkumar S,Yao X,Makhlouf M.Polymer-Melt Interactions During Casting Formation in the Lost Foam Process[J].Scripta Metallurgica et Materialia,1995,33(1):39-46.
  • 10Goria C A.Coating permeability:A critical parameter of the evaporative pattern process[J].AFS Transaction,1986,101:589-597.

共引文献12

同被引文献1

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部