期刊文献+

随钻扩眼工具井底钻压分配的实验研究 被引量:12

Experimental research on ratio of weight on bit for reaming while drilling tools
下载PDF
导出
摘要 为了考察随钻扩眼工具钻进过程中产生的特殊结构井眼对井底钻压分配的影响,按照相似原理建立了随钻扩眼工具底部钻柱动力学特性模拟实验装置,对领眼井底与阶梯井底的钻压分配规律进行了研究。模拟实验结果表明,随钻扩眼形成的阶梯式井底岩石要比领眼井底岩石更容易破碎,实际钻压分配比小于按照几何结构定义的钻压分配比。该结果与理论模型的研究得到的结论一致。 To study the effect of the peculiar borehole created by reaming while drilling tools on the ratio of weight on bit (WOB), an experimental facility modeling the dynamic characteristic of the drill string with reaming while drilling tools was established based on the similarity principle. The experimental research on the ratio of WOB for the reaming while drilling tools wascarried out. And the results show that the rock around the ladder borehole is apt to fall into pieces compared with the rock around the pilot hole. The actual ratio of WOB is smaller than that calculated by the geometry method, which agrees well with the result obtained by the theoretical method.
出处 《中国石油大学学报(自然科学版)》 EI CAS CSCD 北大核心 2007年第6期44-47,共4页 Journal of China University of Petroleum(Edition of Natural Science)
关键词 随钻扩眼工具 钻压分配比 实验研究 reaming while drilling tools ratio of weight on bit experimental research
  • 相关文献

参考文献6

  • 1DAVE Rodman, THOMAS Wong, ADRIAN C Chong. Steerable hole enlargement technology in complex 3D directional wells[ R]. SPE 80476,2003.
  • 2MORRISON W, BAGGAL Z, BAXENDALE B, et al. Optimizing wellbore design using solid expandable tubular and bi-center bit technologies[ R]. SPE92886,2005.
  • 3CHARLRS D Whitson, MICHAEL K Mcfadyen. Lessons learned in the planning and drilling of deep, subsalt wells in the deepwater Gulf of Mexico[ R]. SPE 71363,2001.
  • 4Maggie Lee,申守庆.美国十大钻头公司的十大钻头新技术[J].国外油田工程,2002,18(7):14-20. 被引量:5
  • 5DAVE Rodman. Near-bit reamer allows underreaming while drilling with steerable systems [ J ]. JPT, 2001,53 ( 1 ) :20-21.
  • 6管志川,靳彦欣,王以法.直井底部钻柱运动状态的实验研究[J].石油学报,2003,24(6):102-106. 被引量:59

二级参考文献4

共引文献61

同被引文献82

引证文献12

二级引证文献103

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部