期刊文献+

氧化铝陶瓷与不锈钢扩散连接研究 被引量:1

Study on Diffusion Bonding of Alumina Ceramic and Stainless Steel
下载PDF
导出
摘要 先在氧化铝陶瓷表面用真空蒸发镀膜的方法镀一层镍膜,再以纯镍粉为中间层材料,实现了氧化铝陶瓷与AISI201不锈钢的扩散连接。对连接接头进行了抗剪强度测试和微观形貌及相结构分析。结果表明:在连接温度900℃,保温时间2h,连接压强30kPa的条件下接头剪切强度最高可达20.7 MPa;扩散连接过程中生成了AlNi金属间化合物。 A layer of nickel film was plated by using vacuum evaporation on Al2O3 ceramic surface, then the diffusion bonding of Al2O3 ceramic and AISI201 stainless steel was realized by using pure Ni powder as interlayer material. The bonding joint was tested by shear strength testing, and its micro-morphology and phase structure were analyzed.The results show that the highest shear strength of the joint reaches up to 20.7 MPa at bonding temperature 900℃, holding time 2 hours, bonding pressure 30 kPa. A1Ni intermetallie compound is generated during diffusion bonding.
作者 秦森
出处 《热加工工艺》 CSCD 北大核心 2007年第23期25-27,共3页 Hot Working Technology
关键词 扩散连接 氧化铝陶瓷 不锈钢 金属间化合物 diffusion bonding alumina ceramic stainless steel intermetallic compound
  • 相关文献

参考文献2

二级参考文献12

共引文献21

同被引文献14

  • 1李卓然,樊建新,冯吉才.氧化铝陶瓷与金属连接的研究现状[J].宇航材料工艺,2008,38(4):6-10. 被引量:11
  • 2新野正之,平井敏雄,渡边龙三.倾斜机能材料[J].复合材料学会志,1987,13(6):257-264.
  • 3Genova L A. Lzhevski V A and Bressiani J C. Effect of the Processing Variables on Synthesis of Si3 N4 Particles[ J]. J. Eur. Ceram. Soc. ,2008, 28( 1 ) :295-301.
  • 4Zhang J, Guo Y L, Watanabe H et al. Improving the Microstructure of Si3 Na-TiN Composites Using Various PELS to Dispels Raw TiO2 Powder [J]. Ceram. Int. ,2007,33(3) :335-359.
  • 5Zhang J and Sun Y. Microstructure and Mechanic Characterization of Si3 N4/Si3 N4 Joint Brazed Using Au-Ni-V Filler Alloy [ J ]. J. Eur. Ceram. Soc. ,2010,30(3) :751-756.
  • 6Jack K H. Review : Sialons and Related Nitrogen Ceramics[ J ]. J. Mater. Sci. 1976,U (6) : 1135-1158.
  • 7Sreekumar C, Henry K T. Microwave Sintering of β-Sialon -ZrO2 Composites[J]. Materials & Design,2010,31:3641-3646.
  • 8Yang J F, Zhang G J, She J H. Improvement of Mechanical Properties and Corrosion Resistance of porous β-sialon Ceramics by Low Y2 O3 additions [J]. J. Am. Ceram. Soc. ,2004,87(9) :1714-1719,.
  • 9张国兵,郭全贵,刘朗,史景利,翟更太,宋进仁.B_4C/C功能梯度材料制备及其性能研究[J].材料工程,2007,35(12):58-62. 被引量:3
  • 10单英春,徐久军,李江涛,黄秋凤.成分对两步热压烧结Y-α-sialon微观结构和致密度的影响[J].硅酸盐学报,2008,36(11):1625-1628. 被引量:2

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部