期刊文献+

氨基硅烷偶联剂表面改性SiC微粉的研究 被引量:15

Study on Surface Modification of Silicon Carbide Powders with Aminoorganosilanes
下载PDF
导出
摘要 采用3种氨基硅烷偶联剂WD-50、WD-52和WD-57对SiC微粉进行表面改性,制备出高固相含量、低粘度的SiC料浆,并通过红外光谱分析了SiC微粉改性前后的表面特性。结果表明,采用偶联剂WD-52改性的SiC微粉固相体积含量达到54.5%、料浆稳定性显著提高且粘度降低,与偶联剂WD-50和WD-57相比,WD-52的改性效果最好。 The surface modification of SiC powders with three kinds of aminoorganosilanes WD-50, WD-52 and WD-57 was carried out,and SiC slurry with high solid loading and low viscosity was prepared. Infrared fourier transform spectrometry was applied to analyze the surface characters of SiC powders. The results showed that the largest solid loading of SiC coated with WD-52 was raised up to 54. 5% and the stabilization of slurry also increased remarkably. At the same time , the viscosity of SiC slurry declined. Compared with WD-50 and WD-57,WD-52 was most effective for modification of SiC powders.
出处 《化学与生物工程》 CAS 2008年第1期21-23,共3页 Chemistry & Bioengineering
基金 湖北省自然科学基金资助项目(2005ABA014)
关键词 SIC 偶联剂 表面改性 silicon carbide aminoorganosilane modification
  • 相关文献

参考文献6

  • 1晏伯武.凝胶注模成型工艺的研究[J].中国陶瓷,2006,42(2):8-11. 被引量:22
  • 2Ananthakumar S,Prabhakaran K,Hareesh U S,et al.Gelcasting process for Al2 O3-SiC nanocomposites and its creep characteristics[J].Materials Chemistry and Physics,2004,85 (1):151-157.
  • 3Yi Zhong-Zhou,Xie Zhi-Peng,Ma Jing-Tao,et al.Study on gelcasting of silicon nitride-bonded silicon carbide refractories[J].Materials Letters,2002,56(6):895-900.
  • 4Jung Yunsung,Paik Ungyu,Pagnoux Cecile,et al.Consolidation of aqueous concentrated silicon nitride suspension by direct coagulation casting[J].Materials Science and Engineering:A,2003,342(1):93-100.
  • 5刘学建,黄莉萍,古宏晨,徐鑫,符锡仁.直接凝固注模成型氮化硅陶瓷[J].无机材料学报,2001,16(5):877-882. 被引量:11
  • 6Michael A Buchta,Shi Wei-heng.Improved aqueous dispersion of silicon nitride with aminosilanes[J].Am Ceram Soc,1996,79(11):2940-2946.

二级参考文献24

  • 1Jingtao Ma,Zhongzhou Yi,Zhipeng Xie,Longjie Zhou,Hezhou Miao,Baoqing Zhang and Xuping Zhou.Gelcasting of alumina with a mixed PVP-MAM system[J].Cermaics international,31(2005) 1015-1019
  • 2陈艳.[D].武汉华中科技大学图书馆,2003,7213-216.
  • 3Omatete O O,Nick J J.Improved gelcasting systems.Cream Eng Sci Proc,1999,20(30):241-248
  • 4Chang-Gi Ha,Yeon Gil Jung,Jae-Won Kim,ChangYong Jo and Ungyu Paik.Effect of particle size on gelcasting process and green properties in alumina[J].Materials Science and Engineering A337 (2002):212-221
  • 5Dong Guo,Kai Cai,Longtu Li,et al.,Gelcasting of PZT,Ceramics International.29(2003):403-406
  • 6Dong Guo,Longtu Li,Zhilun Gui,et al.,Anti crack machining of PZT ceramics for fabricating piezocomposites by using gelcasting technique,Materials Science and Engineering B99 (2003):25-28
  • 7Yunxiang Hu,Dongxiang Zhou,Daoli Zhang,Wenzhong Lu,PTCR Characteristics of Gelcast BaTiO3 Ceramic Thermistor,Sensors & Actutors,A,88(1),67-70(2001)
  • 8Young A.C.,Omatete O.O.,Janney M.A.,et al.,Gelcasting of alumina,J.Am.Ceram.Soc.,74(3),612-618 (1991)
  • 9杨金龙 戴春雷 黄勇.凝胶注模成型陶瓷浆料真空除气泡的新方法[P].中国,C04B 33/28,CN1557769A.2004,12,29.
  • 10Jingtao Ma,Zhipeng Xie,Hezhou Miao,Yong Huang,Yibing Cheng and Weiyou Yang.Gelcasting of alumina ceramics in the mixed acrylamide and polyacrlamide systems[J].Journal of the European ceramic society,23(2003)2273-2279

共引文献31

同被引文献117

引证文献15

二级引证文献61

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部