期刊文献+

YP02型叶片测量仪软件系统开发的关键技术 被引量:2

Key Techniques of YP02 Blade Measuring Machine Software System
下载PDF
导出
摘要 对YP02型叶片测量仪专用软件系统开发的关键技术进行了研究,该软件系统包含数据测量、数据处理及结果分析三个关键模块。在数据测量模块中,提出建立叶根及叶冠坐标系的5点测量法,提出根据叶根、叶冠坐标系建立叶片工件坐标系的方法,定义运动指令和控制指令;在数据处理模块中,给出理论型线冗余点剔除、理论型线的偏置及实测型线与偏置型线匹配的算法;在结果分析模块中,给出常用误差分析的算法。基于上述关键技术,开发YP02型叶片测量仪的专用软件系统,并用该系统对多种类型叶片进行测量,结果表明软件系统具有高效及易操作等特点。 A software system of YP02 blade measuring machine is presented, which is composed of three key modules : data measuring, data treatment and results analysis.Key techniques for the each module are developed.In the data measuring module, "five points measuring method" is put forward to set up workpiece coordinate system of blade root and blade shroud, and the method to set up blade workpiece coordinate system is brought forward according to the blade root coordinate system and blade shroud coordinate system; Control command and moving command are defined.In the data treatment module, arithmetic of getting rid of redundant points, offsetting of original profile-curve and the matching arithmetic between real measuring profile-curve and offsetting profile-curve are given.In the result analysis module, some methods of errors calculating are given.Using the key techniques discussed, a special software system for YP02 blade measuring machine is developed and measuring examples are given.The measuring result shows that the software system is a highly efficient and convenient system.
出处 《机械工程学报》 EI CAS CSCD 北大核心 2008年第4期239-245,共7页 Journal of Mechanical Engineering
关键词 叶片测量 软件系统 数据处理 Blade measuring Software system Data treatment
  • 相关文献

参考文献6

二级参考文献22

  • 1全荣,翁玲.复杂型面坐标的自动化测量系统[J].宇航计测技术,1993,12(4):15-18. 被引量:1
  • 2全荣,翁玲.评定线轮廓度误差的通用数学模型[J].宇航计测技术,1994,13(2):30-34. 被引量:2
  • 3Kwan H.Lee,Hyun-pung Park.Automated inspection planning of free-form shape parts by laser scanning[J].Robotics and Computer Integrated Manufacturing,2000(16):201-210.
  • 4DIAA F.ELKOTT,HODA A.ELMARAGHY,WAGUIH H.ELMARAGHY.Automatic sampling for CMM inspection planning of free-form surfaces[J].INT.J.PROD.RES.,2002,40(11):2653-2676.
  • 5Omer L.Hageniers.Recent advances in laser triangulation-based measurement of airfoil surfaces[R].Ontario,Canada:Diffracto Limited,2835 Kew Drive Windsor,N8T 3B7.
  • 6ABBAS VAFAEESEFAT,HODA A.ELMARAGHY.Automated accessibility analysis and measurement clustering for CMMs[J].INT.J.PROD.RES.,2000,38(10):2215-2231.
  • 7刘艳.叶片制造技术[M].北京:科学出版社,2002..
  • 8Clemens Szyperski.Component software :beyond object-oriented programming[M].ACM Press, 1998
  • 9Clements PC.From subroutines to subsystems:component-based software development[C].In:Brown AW ed. Component-Based Software Engineering:selected Papers from the Software Engineering Institute.Los Alamitos,CA:IEEE Computer Society Press,1996:3~6
  • 10ErichGamma 李英军译.设计模式-可复用面向对象软件的基础[M],RalphJohnsonetal,RichardHelm,AddisonWesley[M].机械工业出版社,2000..

共引文献33

同被引文献22

  • 1王耀东.放缩、反演和障碍问题[J].数学进展,1995,24(1):44-50. 被引量:1
  • 2Fusaomi Nagata, Yukihiro Kusumoto, Yoshihiro Fujimoto, et al. Robotic sanding system for new designed furniture with free-formed surface[J]. Robotics and Computer-Integrated Manufacturing, 2007,23(4) :371-379.
  • 3Stephien T M, Sweet L M, Good M C, et al. Control of tool/workpiece contact force with application to robotic deburring[J]. IEEE Journal of Robotics Automation, 1987,3(1) :7-18.
  • 4Kazerooni H. Robotic deburring of two dimensional parts with unknown geometry[J]. Journal of Manufacturing System, 1988,7(4) : 329-338.
  • 5Her M G, Kazerooni H. Automated robotic deburring of parts using compliance control [J]. ASME Journal of Dynamic System, Measurement, and Control, 1991,113:60-66.
  • 6Bone G M, Elbestawi M A, Lingarkar R, et al. Force control of robotic deburring[J]. ASME Journal of Dynamic System, Measurement, and Control, 1991,113:395-400.
  • 7Gorinevsky D M, Formalsky A M, Schneider A Y U. Force Control of Robotics Systems[M]. New York: CRC Press, 1997.
  • 8Werner A, Skalski K, Piszczatowski S, et al. Reverse engineering of free-form surface[J]. Journal of Materials Processing Technology, 1998, 76: 128- 132.
  • 9Product Manual IRB[M]. Sweden: ABB Robotics Corporation, 2000.
  • 10张庆礼,王晓梅,殷绍唐,江海河.高阶高斯积分节点的高精度数值计算[J].中国工程科学,2008,10(2):35-40. 被引量:17

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部