摘要
A NiCrAlY coating was deposited on the TC6 titanium substrate by arc ion plating （ALP）. The structure and morphologies of the NiCrAlY coating were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）, and the influence of vacuum heat treatment on the element diffusion behavior was studied. The results showed that the y＇-Ni3Al phase was precipitated on the NiCrAlY coating after heat treatment. The Ni3（AI,Ti）, TiNi, and Ti2Ni intermetallic layers appeared at the interface from the outside to the inside at 700℃, and the thickness of the intermetallic layers increased with the increase in temperature. At 700℃ Ti and Ni were the major diffusion elements, and the diffusion of Cr was observed when the heat treatment temperature increased up to 870℃. The violent inward diffusion of Ni at 950℃ resulted in the degradation of the NiCrAlY coating.
A NiCrAlY coating was deposited on the TC6 titanium substrate by arc ion plating （ALP）. The structure and morphologies of the NiCrAlY coating were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）, and the influence of vacuum heat treatment on the element diffusion behavior was studied. The results showed that the y＇-Ni3Al phase was precipitated on the NiCrAlY coating after heat treatment. The Ni3（AI,Ti）, TiNi, and Ti2Ni intermetallic layers appeared at the interface from the outside to the inside at 700℃, and the thickness of the intermetallic layers increased with the increase in temperature. At 700℃ Ti and Ni were the major diffusion elements, and the diffusion of Cr was observed when the heat treatment temperature increased up to 870℃. The violent inward diffusion of Ni at 950℃ resulted in the degradation of the NiCrAlY coating.
基金
This study was supported by the National Key Program of the Tenth Five-Year Plan of China (05-MKP-089).
