Process Parameter Optimization of the Pulsed Current Argon Tungsten Arc Welding of Titanium Alloy 被引量：5

Process Parameter Optimization of the Pulsed Current Argon Tungsten Arc Welding of Titanium Alloy

下载PDF

导出

摘要 The selection of process parameters for obtaining optimal tensile properties in the pulsed current gas tungsten arc welding is presented. The tensile properties include ultimate tensile strength, yield strength and notch tensile strength. All these characteristics are considered together in the selection of process parameters by modified taguchi method to analyse the effect of each welding process parameter on tensile properties. Experimental results are furnished to illustrate the approach. The selection of process parameters for obtaining optimal tensile properties in the pulsed current gas tungsten arc welding is presented. The tensile properties include ultimate tensile strength, yield strength and notch tensile strength. All these characteristics are considered together in the selection of process parameters by modified taguchi method to analyse the effect of each welding process parameter on tensile properties. Experimental results are furnished to illustrate the approach.

作者 M.Balasubramanian V.Jayabalan V.Balasubramanian

机构地区 Department of Mechanical Engineering Department of Manufacturing-Engineering Department of Manufacturing Engineering

出处《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2008年第3期423-426,共4页 材料科学技术（英文版）

关键词 Pulsing current Modified taguchi method Tensile properties Pulsing current Modified taguchi method Tensile properties

分类号 TG457.1 [金属学及工艺—焊接]

引文网络
相关文献

参考文献1

1M.Balasubramanian,V.Jayabalan,V. Balasubramanian.Optimizing the Pulsed Current Gas Tungsten Arc Welding Parameters[J].Journal of Materials Science & Technology,2006,22(6):821-825. 被引量：9

二级参考文献15

1[1]F.W.Frase and E.A.Metzbower:Laser Welding of a Titanium Alloy,eds.D.F.Hasson and C.H.Hamilton,The Metallurgical society of AIME,Warrendale,PA,1982,175-187.
2[2]P.E.Denney and E.A.Metzbower:Weld.J.,1989,68,329.
3[3]J.E.Gould,W.A.Baeslack and J.C.Williams:Some Aspects of Welding on the Structure and Properties of Titanium Alloys,eds.D.F.Hasson and C.H.Hamilton,The Metallurgical Society of AIME,Warrendale,1982,203-223.
4[4]R.P.Simpson:Weld.J.,1977,56,67s.
5[5]J.G.Garland:Metal Construct.,1974,6,121.
6[6]K.Prasad Rao:in Proc.of National Conf.on Recent Advancement in Materials Processing (RAMP),Annamalai University,India,2001,176.
7[7]P.Ravi Vishnu:Weld.World,1995,35,214.
8[8]A.A.Gokhale,A.A.Tzavaras,H.D.Brody,G.M.Ecer,G.J.Abbaschian and S.A.David:Grain Refinement in Castings and Welds,TMS-AIME,Warrendale,1983,223.
9[9]G.Madhusudhan Reddy,A.A.Gokhale and K.Prasad Rao:J.Mater.Sci.,1997,32,4117.
10[10]H.Yamamoto:Weld.Int.,1993,7(6),456.

共引文献8

1M. Balasubramanian,V. Jay abalan,V. Balasubramanian.Modeling corrosion behavior of gas tungsten arc welded titanium alloy[J].中国有色金属学会会刊：英文版,2007,17(4):676-680. 被引量：1
2M.Balasubramanian,V.Jayabalan,V.Balasubramanian.Effect of process parameters of pulsed current tungsten inert gas welding on weld pool geometry of titanium welds[J].Acta Metallurgica Sinica(English Letters),2010,23(4):312-320. 被引量：5
3毛建伟,吕维洁,王立强,张荻,覃继宁.Microstructure and mechanical properties of GTA weldments of titanium matrix composites prepared with or without current pulsing[J].Transactions of Nonferrous Metals Society of China,2014,24(5):1393-1399. 被引量：2
4林杨胜蓝,何建萍,左士伟,王付鑫,吉永丰.基于电压最小原理的脉冲微束等离子弧焊电弧形态的动态平衡研究[J].热加工工艺,2015,44(17):159-164.
5K. Siva Prasad,Ch.Srinivasa Rao,D.Nageswara Rao.Study on Weld Quality Characteristics of Pulsed Current Micro Plasma Arc Welding of Inconel625 Sheets[J].Journal of Minerals and Materials Characterization and Engineering,2012,11(2):133-141. 被引量：1
6Kondapalli Siva Prasad,Chalamalasetti Srinivasa Rao,Damera Nageswara Rao.Study on Factors Effecting Weld Pool Geometry of Pulsed Current Micro Plasma Arc Welded AISI 304L Austenitic Stainless Steel Sheets Using Statistical Approach[J].Journal of Minerals and Materials Characterization and Engineering,2012,11(8):790-799.
7Kondapalli Siva Prasad,Chalamalasetti Srinivasa Rao,Damera Nageswara Rao.Application of Hooke &Jeeves Algorithm in Optimizing Fusion Zone Grain Size and Hardness of Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets[J].Journal of Minerals and Materials Characterization and Engineering,2012,11(9):869-875.
8Chalamalasetti Srinivasa Rao,Kondapalli Siva Prasad,Damera Nageswara Rao.Study on Effect of Welding Speed on Micro Structure and Mechanical Properties of Pulsed Current Micro Plasma Arc Welded Inconel 625 Sheets[J].Journal of Minerals and Materials Characterization and Engineering,2012,11(10):1027-1033. 被引量：1

引证文献5

1何林,刘颖,李军,李兵红.高硼Fe-Ti-B合金焊件微观结构和力学性能（英文）[J].稀有金属材料与工程,2014,43(2):283-286. 被引量：1
2Hui-Jun Yi,Yong-Jun Lee,Kwang-O Lee.Influences of the Welding Heat Input and the Repeated Repair Welding on Ti–3Al–2.5V Titanium Alloy[J].Acta Metallurgica Sinica(English Letters),2015,28(6):684-691. 被引量：3
3Radovan Kovacevic.Hybrid Laser-GMAW Welding of High Strength Quenched-Tempered Steels[J].稀有金属材料与工程,2011,40(S4):102-105.
4党宁,刘玲玉,LAVOGIEZ Cyril,MAIRE Eric,马朝利,周廉.激光焊接Ti-6Al-4V钛合金塑性行为的原位SEM/EBSD分析（英文）[J].中国材料进展,2019,38(3):279-285. 被引量：1
5Massab Junaid,Fahd Nawaz Khan,Tauheed Shahbaz,Haris saleem,Julfikar Haider.Influence of Filler on the Microstructure, Mechanical Properties and Residual Stresses in TIG Weldments of Dissimilar Titanium Alloys[J].Acta Metallurgica Sinica(English Letters),2021,34(10):1395-1406.

二级引证文献5

1张先满,罗洪峰,史留勇.高硼铸钢的研究进展[J].材料导报,2017,31(5):65-71. 被引量：3
2冯义成,张令柱,王琴,解东栋,刘东戎,马宝霞,刘洪汇,王德峰,王丽萍,郭二军.焊接电流对ZM6镁合金薄壁件焊接接头组织和性能的影响[J].兵器材料科学与工程,2017,40(2):29-33. 被引量：3
3郭彦辉,邓冬,孙造占,黄炳臣.重复焊接对304不锈钢热影响区组织与性能的影响[J].核动力工程,2021,42(4):198-202. 被引量：3
4周薇,汪畅,刘继雄,李斯韫,刘会群.亚稳β型Ti-6Cr-5Mo-5V-4Al合金的时效析出序列及ω和次生α相对拉伸性能的影响[J].Transactions of Nonferrous Metals Society of China,2023,33(6):1742-1754.
5宋文杰,翟超,顾永刚,龚明,梁莉.用于扫描电镜中的新型原位EBSD拉伸系统设计[J].制造业自动化,2024,46(6):175-179.

1刘清良,莫开旺.摩托车转轴磨削工艺参数最优化的研究[J].山东建材学院学报,1998,12(3):243-245.
2Jing-Li Zhang,Hong-Zhen Guo,Hou-Quan Liang.Hot deformation behavior and process parameter optimization of Ti22Al25Nb using processing map[J].Rare Metals,2016,35(1):118-126. 被引量：5
3T.Senthil Kumar,V.Balasubramanian,M.Y.Sanavullah,S.Babu.Effect of Pulsed Current TIG Welding Parameters on Pitting Corrosion Behaviour of AA6061 Aluminium Alloy[J].Journal of Materials Science & Technology,2007,23(2):223-229. 被引量：5
4Kondapalli Siva Prasad,Chalamalasetti Srinivasa Rao,Damera Nageswara Rao.Effect of pulsed current micro plasma arc welding process parameters on fusion zone grain size and ultimate tensile strength of Inconel 625 sheets[J].Acta Metallurgica Sinica(English Letters),2012,25(3):179-189. 被引量：4
5金属学与金属工艺[J].全国新书目,2003,0(7):113-113.
6M.Balasubramanian,V.Jayabalan,V.Balasubramanian.Effect of process parameters of pulsed current tungsten inert gas welding on weld pool geometry of titanium welds[J].Acta Metallurgica Sinica(English Letters),2010,23(4):312-320. 被引量：5
7S.BABU,T.SENTHIL KUMAR,V.BALASUBRAMANIAN.Optimizing pulsed current gas tungsten arc welding parameters of AA6061 aluminium alloy using Hooke and Jeeves algorithm[J].中国有色金属学会会刊：英文版,2008,18(5):1028-1036. 被引量：8
8张义平,王少刚,徐九华.Interfacial reaction control during pulsed argon arc welding of SiC_p/Al composites[J].中国有色金属学会会刊：英文版,2005,15(S3):339-343.
9M.Aliofkhazraei,Sh.Ahangarani,A.Sabour Rouhaghdam.Effect of the duty cycle of pulsed current on nanocomposite layers formed by pulsed electrodeposition[J].Rare Metals,2010,29(2):209-213. 被引量：4
10K.DEVAKUMARAN,M.R.ANANTHAPADMANABAN,P.K.GHOSH.Variation of chemical composition of high strength low alloy steels with different groove sizes in multi-pass conventional and pulsed current gas metal arc weld depositions[J].Defence Technology（防务技术）,2015,11(2):147-156. 被引量：1

Journal of Materials Science & Technology

2008年第3期

浏览历史

内容加载中请稍等...