期刊文献+

Microstructure and Properties of W-15Cu Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering Process 被引量:2

Microstructure and Properties of W-15Cu Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering Process
下载PDF
导出
摘要 W-15Cu composite powders prepared by mechanical alloying (MA) of raw powders were consolidated by spark plasma sintering (SPS) process at temperature ranged 1 230-1 300 ℃ for 10 min and under a pressure of 30 MPa. By using high energy milling, particles containing very fine tungsten grains embedded in copper, called composite particles, could be produced. The W grains were homogeneously dispersed in copper phase, which was very important to obtain W-Cu alloy with high mechanical properties, fine and homogeneous microstructure. The microstructure and properties of W-15Cu alloys prepared by SPS processes at different temperature were researched. The results show that W-15Cu alloys consolidated by SPS can reach 99.6 % relative density, and transverse rupture strength (TRS) is 1 400.9 MPa, Rockwell C hardness (HRC) is 45.2, the thermal conductivity is 196 W/m-K at room temperature, the average grain size is less than 2 μm, and W-15Cu alloy with excellent properties, homogeneous and fine microstructure is obtained. W-15Cu composite powders prepared by mechanical alloying (MA) of raw powders were consolidated by spark plasma sintering (SPS) process at temperature ranged 1 230-1 300 ℃ for 10 min and under a pressure of 30 MPa. By using high energy milling, particles containing very fine tungsten grains embedded in copper, called composite particles, could be produced. The W grains were homogeneously dispersed in copper phase, which was very important to obtain W-Cu alloy with high mechanical properties, fine and homogeneous microstructure. The microstructure and properties of W-15Cu alloys prepared by SPS processes at different temperature were researched. The results show that W-15Cu alloys consolidated by SPS can reach 99.6 % relative density, and transverse rupture strength (TRS) is 1 400.9 MPa, Rockwell C hardness (HRC) is 45.2, the thermal conductivity is 196 W/m-K at room temperature, the average grain size is less than 2 μm, and W-15Cu alloy with excellent properties, homogeneous and fine microstructure is obtained.
作者 章桥新
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2008年第3期399-402,共4页 武汉理工大学学报(材料科学英文版)
基金 Funded by the Youth Science Plan for Light of the Morning Sun of Wuhan City(No.200750731270).
关键词 W-15Cu mechanical alloying spark plasma sintering (SPS) W-15Cu mechanical alloying spark plasma sintering (SPS)
  • 相关文献

参考文献10

  • 1Kim D G,,Kim G S,Oh S T,et al.The Initial Stage of Sintering for the W-Cu Nanocomposite Powder Prepared from W-CuO Mixture[].Materials Letters.2004
  • 2DoréF,Lay S,Eustathopoulos N,et al.Segregation of Fe During the Sintering of Doped W-Cu Alloys[].Scripta Materialia.2003
  • 3Kim D G,Lee K W,Oh S T,et al.Preparation of W-Cu Nanocomposite Powder by Hydrogen-reduction of Ball-milled W and CuO Powder Mixture[].Materials Letters.2004
  • 4Kim J C,and Moon I H.Sintering of Nanostructured W-Cu Alloys Prepared by Mechanical Alloying[].Nanostructured Materials.2002
  • 5DoréF,Martin C L,Allibert C H.Apparent Viscosity of W-Cu Powder Compacts During Sintering[].MaterSciEngA.2004
  • 6Gao L,Hong J S,Miyamoto H,et al.Bending Strength and Microstructure of Al 2O 3Ceramics Densified by Spark Plasma Sintering[].JEurCeramSoc.2000
  • 7KIM Y D,OH N L,OH S T.Thermal conductivity of W-Cucomposites at various temperatures[].Materials Letters.2001
  • 8Yoon E S,Lee J S,Sung J O.Microstructure and sintering behavior of W-Cu nanocomposite powder produced by thermo-chemical process[].International Journal of Refractory Metals and Hard Materials.2002
  • 9Hong S H,Kim B K.Fabrication of W- 20wt% Cu composite nanopowder and sintered alloy with high thermal conductivity[].Materials Letters.2003
  • 10S S Ryu,Y D Kim,I H Moon.Dilatometric analysis on the sintering behavior of nanocrystalline W-Cu prepared by mechanical alloying[].Journal of Alloys and Compounds.2002

同被引文献36

  • 1张久兴,张忻,岳明,周美玲,左铁镛.放电等离子烧结技术与新材料研究[J].功能材料信息,2004,1(3):14-21. 被引量:10
  • 2王景唐,沈同德.机械合金化研究与进展[J].物理,1993,22(8):456-460. 被引量:17
  • 3蒙冕武,刘心宇,成钧,周怀营.球磨参数对MgNi非晶热稳定性能的影响[J].功能材料,2005,36(5):697-700. 被引量:4
  • 4宋涛,王同敏,赵九洲,薛冠霞,李廷举.均质难混溶合金制备技术研究进展[J].铸造,2007,56(10):1025-1030. 被引量:8
  • 5Qiaoxin Zhang,Xiaoliang Shi,Hua Yang,Xinglong Duan.Microstructure and properties of W-15Cu alloys prepared by mechanical alloying and spark plasma sintering process[J]. Journal of Wuhan University of Technology - Mater. Sci. Ed. . 2008 (3)
  • 6I. Sabirov,R. Pippan.Formation of a W–25%Cu nanocomposite during high pressure torsion[J]. Scripta Materialia . 2005 (12)
  • 7Dae-Gun Kim,Gil-Su Kim,Myung-Jin Suk,Sung-Tag Oh,Young Do Kim.Effect of heating rate on microstructural homogeneity of sintered W–15wt%Cu nanocomposite fabricated from W–CuO powder mixture[J]. Scripta Materialia . 2004 (7)
  • 8S.S Ryu,Y.D Kim,I.H Moon.Dilatometric analysis on the sintering behavior of nanocrystalline W–Cu prepared by mechanical alloying[J]. Journal of Alloys and Compounds . 2002 (1)
  • 9Hungria T.,Castro A.,Galy J.Spark plasma sintering as a useful technique to the nanostructuration of piezo-ferroelectric materials. Advanced Engineering Materials . 2009
  • 10周兰章,郭建亭,全明秀.NiAl/TiC纳米材料机械合金化合成机理[J].金属学报,1997,33(11):1222-1226. 被引量:14

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部