期刊文献+

Solute Distribution in Columnar Crystal Zone and Influences of Correlative Factors for Continuous Casting Slabs

Solute Distribution in Columnar Crystal Zone and Influences of Correlative Factors for Continuous Casting Slabs
原文传递
导出
摘要 The expression of the solute distribution in columnar crystal zone was deduced when the solid-liquid interface bended periodically, and the quantitative calculations of macrosegregation were also made in the process of the continuous casting. The solute distribution along the thickness direction of the slabs was obtained, which verified the theoretical calculation. The effect of the bulge size, solidification speed, and solidification shrinkage speed on macrosegregation of the slabs was calculated. It can be concluded that normal segregation and negative segregation alternatively appear as a result of the bulge. The normal segregation exponentially depends on the bulge size, and the negative segregation linearly depends on the bulge size. The extent of the normal segregation is greater than that of the negative segregation when the bulge size is the same. The macrosegregation of the same position along the thickness direction of the slabs changes in a sine wave with increasing the solidification rate, and the amplitude is larger at the casting blank center. The normal segregation linearly decreases with increasing the solidification shrinkage speed, and when the solidification shrinkage speed exceeds a critical value, the segregation appears negatively and increases linearly. The expression of the solute distribution in columnar crystal zone was deduced when the solid-liquid interface bended periodically, and the quantitative calculations of macrosegregation were also made in the process of the continuous casting. The solute distribution along the thickness direction of the slabs was obtained, which verified the theoretical calculation. The effect of the bulge size, solidification speed, and solidification shrinkage speed on macrosegregation of the slabs was calculated. It can be concluded that normal segregation and negative segregation alternatively appear as a result of the bulge. The normal segregation exponentially depends on the bulge size, and the negative segregation linearly depends on the bulge size. The extent of the normal segregation is greater than that of the negative segregation when the bulge size is the same. The macrosegregation of the same position along the thickness direction of the slabs changes in a sine wave with increasing the solidification rate, and the amplitude is larger at the casting blank center. The normal segregation linearly decreases with increasing the solidification shrinkage speed, and when the solidification shrinkage speed exceeds a critical value, the segregation appears negatively and increases linearly.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2008年第4期21-25,共5页
基金 Item Sponsored by National Natural Science Foundation of China (50374043)
关键词 continuous casting columnar crystal zone solute distribution MACROSEGREGATION continuous casting columnar crystal zone solute distribution macrosegregation
  • 相关文献

参考文献14

二级参考文献20

  • 1刘慰俭,戴一一.液芯连铸坯壳鼓肚变形的研究[J].重型机械,1994(4):10-16. 被引量:1
  • 2Gu J P,Metall Mater Trans A,1999年,30卷,1357页
  • 3Ni J,Metall Trans.B,1991年,22卷,349页
  • 4苏翼林.材料力学(下册)[M].北京:人民教育出版社,1982..
  • 5Chang Guo-wei, Zhao Zeng-wu, Wang Jing-song. Solute Distribution in Columnar Crystal Zone of Continuous Casting Billets[J]. Trans. Nonferrous Met. Soc. China.2001,11(10):708-711.
  • 6于力.连续铸钢手册[M].北京:冶金工业出版社,1990.12.
  • 7铸造手册(铸钢)[M].北京:机械工业出版社.1991.11.
  • 8TORU K, NLIKIO S, TOSHIO M et al. Improvemet of Centerline Segregation in Continuously Small Diameter Rolls in Fukuyama No.4 Caster [J]. NKK. Technology Report, 1998,121:1-8.
  • 9草野昭彦 三隅秀幸 千叶仁 等.连铸铸片の中心割れの发生机构[J].铁と钢,1998,84(1):43-43.
  • 10JIE Wanqi,Zhou Yaohe.Formation of hot-top segregation in steel ingot and effect of steel compositions[J].Metallurgical Transactions B.1989(5)

共引文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部