摘要
探讨用剑杆织机织造牛仔布时松边问题的解决办法。分析了产生松边的原因,在整经工序调整整经张力,使边部经纱张力比本区本段张力稍大一些;在浆染工序使浆染织轴边部稍有凹陷,弹力比中部稍小一些;在织造工序调整织物边组织和每筘穿入数、合理设计织物边组织,有效地解决了织造牛仔布松边的问题,不仅使织机效率由74%提高到92.6%,而且改善了织物质量,提高了织物的一等品率。
Settlements of loose selvage in weaving jean in rapier loom were discussed. Reasons of causing loose selvage were analysed, warp tension was adjusted to make selvage warp tension larger slightly in warping process. Sizing and dying beam edge should be sunken and the elasticity should be smaller than that of the middle in sizing and dying process. Fabric selvage weave and warp per reed were adjusted, fabric selvage weave were designed rationally in weaving process, the problems could be solved effectively. Loom efficiency not only could be improved from 74% to 92.6% but also fabric quality and fabric first grade rate could be improved as well.
出处
《棉纺织技术》
CAS
CSCD
北大核心
2008年第8期62-63,共2页
Cotton Textile Technology
关键词
剑杆织机
松边
整经张力
织轴
每筘穿入数
织物组织
Rapier Loom, Loose Selvage, Warping Tension, Loom Beam, Warp per Reed, Fabric Weave
