摘要
在水性UV固化油墨中添加一定数量的助剂,会改变墨膜在聚酯塑料表面的附着力性能,实验中使用的助剂有聚乙烯吡咯烷酮、三乙醇胺和氨水,结果表明助剂对于光固化水性油墨在塑料表面的附着力有很大的提高。
The adhesion promoter will change the adhesion of the water based UV curing ink on the PET surface. The adhesion promoter applied were PVP, N（CH2CH2OH）a ,and NHa. H2O. The results showed that the adhesion is increased significantly between the ink film and PET.
出处
《包装工程》
CAS
CSCD
北大核心
2008年第9期32-33,40,共3页
Packaging Engineering
基金
北京市教委资助项目(KM200810015004)
北京市属市管高等学校人才强教计划资助项目(PHR(IHLB))
关键词
助剂
UV固化油墨
附着力
adhesion promoter
water based UV curing plastic screen printing ink
adhesion
