期刊文献+

ELID磨削钝化膜弹簧刚度计算模型研究 被引量:2

Study on Calculation Model of Spring Stiffness of Passive Film for ELID Grinding
下载PDF
导出
摘要 钝化膜在ELID磨削中具有至关重要的作用。结合磨削原理建立了ELID磨削钝化膜弹簧刚度计算模型,对计算模型进行了理论分析及仿真研究,并进行了实验验证。研究表明,ELID磨削钝化膜弹簧刚度计算模型可以很好表征ELID磨削过程中弹簧刚度的动态变化,这一特性对ELID磨削表面质量的提高起到显著作用。 In ELID grinding the passive film plays a crucial role. With grinding principle the calculation model of spring stiffness of passive film in ELID grinding is established, the theoretical analysis and simulation are carry out and the experimental validation are performed with the model. The results show that using the calculation model of passive film spring stiffness of ELID grinding the dynamic changes of the spring stiffness in the ELID grinding process can be well characterized. This characteristic will greatly improve the surface quality of ELID grinding.
出处 《工具技术》 北大核心 2008年第9期29-32,共4页 Tool Engineering
关键词 ELID磨削 钝化膜 动态弹簧刚度 计算模型 ELID grinding technology, passive film, dynamic spring stiffness, computational model
  • 相关文献

参考文献10

  • 1张飞虎,朱波,栾殿荣,袁哲俊.ELID磨削──硬脆材料精密和超精密加工的新技术[J].宇航材料工艺,1999,29(1):51-55. 被引量:22
  • 2王平,张春河,张飞虎,袁哲俊,周兵林,韩荣久.光学玻璃的磨削加工方法[J].光学精密工程,1996,4(1):53-58. 被引量:12
  • 3谢晋,阮兆武.光学自由曲面反射镜模芯的镜面成型磨削[J].光学精密工程,2007,15(3):344-349. 被引量:15
  • 4Otunori H. Analysis of mirror surface generation of hard and brittle materials by ELID (Electrolytic In-process Dressing)- grinding with superfine grain metallic bond wheels. Annals of CIRP, 1995, 44(1) : 287 - 290
  • 5Ohrnori H, Nakagawa T. Utilization of nonlinear conditions in precision grinding with ELID (Electrolytic in-process dressing) for fabrication of hard material components. Annals of the CIRP, 1997, 46( 1 ) : 261 - 264
  • 6Sato N, Kudo K. Ellipsometry of the passive film on iron in neutral solution. Electrochim Acta, 1971, 16:447 -462
  • 7Dai Y, Ohmori H,Lin W, et al. A fundamental study on optimal oxide layer of fine diamond wheels during ELID grinding process. Key Eng. Mater. ,2006, 304 - 305:176 - 180
  • 8Boland Richard J. Computer control and process monitoring of electrolytic in-process dressing of metal bond fine diamond wheels for NIF optics. SPIE, 1999, 3782:61 - 69
  • 9Fathima K, Rahman M, Senthil Kumar A, et al. Modeling of ultra-precision ELID grinding. Trans. ASME, J Manu. Sci. Eng., 2007, 129(2) : 296 - 302
  • 10Zhang C, Ohmori H, Marinescu I, et al. Grinding of ceramic coatings with cast iron bond diamond wheels. A comparative study: ELID and rotary dresser. Int. J Adv. Manuf. Technol. , 2001, 18 (8) :545 - 552

二级参考文献15

共引文献44

同被引文献15

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部