期刊文献+

多喷嘴射流泵数值模拟及试验研究 被引量:16

Numerical simulation and experiment study on multi-nozzle jet pump
下载PDF
导出
摘要 设计了一种能够缩短喉管长度的多喷嘴射流泵。并采用k-ε湍流模型和壁面函数法对不同结构参数下的多喷嘴射流泵进行了数值模拟和试验研究。结果表明,喷嘴数和喉嘴距对射流泵工作性能影响较大;在吸入室及喉管入口处湍动能较大。得出了射流泵的最佳性能喷嘴数,确定了工作流体和被吸流体喉管混合均匀长度,验证了多喷嘴射流泵可缩短喉管长度,提高了射流泵工程应用价值。 A multi-nozzle jet pump was designed which can shorten the length of throat pipe according to the problem of the traditional single-jet pump with a longer throat pipe, which restricted its application range. The jet pumps with different structural parameters were simulated numerically and experimentally studied using k-ε model and wall functions. The results showed that the number of nozzles and the length of nozzle-spacing had a great influence on working performance of jet pump; turbulent kinetic energy was greater in suction chamber and inlet of throat; the number of the best working performance was obtained; the length of throat in which operating fluid and the drawn liquid was well-mixed was determined. That jet pump could shorten the length of throat pipe was verified, which could enhance the engineering value of jet pump.
出处 《农业工程学报》 EI CAS CSCD 北大核心 2008年第10期95-99,共5页 Transactions of the Chinese Society of Agricultural Engineering
基金 江苏省教育厅高技术产业化项目(JHB05-38)
关键词 射流泵 多喷嘴 数值模拟 试验 jet pumps, multi-nozzles, numerical simulation, experiment
  • 相关文献

参考文献16

二级参考文献60

共引文献134

同被引文献171

引证文献16

二级引证文献52

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部