摘要
为研究热氧化工艺对钛合金表面耐磨性的影响,提高钛合金的表面硬度和耐磨性能,采用热氧化处理技术在钛合金表面生成热氧化陶瓷层,借助电子探针、X衍射仪对热氧化层进行了成分和结构分析。采用MRH-3型高速滑块磨损试验机,在润滑条件下对经热氧化处理和未处理的Ti6Al4V合金耐磨性进行滑动-滚动试验。结果表明:热氧化后的Ti6Al4V合金的磨损量明显减少,该热氧化处理方法能显著增强Ti6Al4V合金的耐磨性。根据试验结果和系统分析,讨论了热氧化处理后材料的摩擦磨损机制。
In order to study the effect of thermal oxidation treatment on wear resistance properties of a titanium alloy and improve the hardness and enhance the wear resistance, the ceramic oxide coating was prepared on Ti6Al4V alloy by thermal oxidation in air. The element profile along oxidation layer and the crystal structure were studied by EMPA and XRD. The wear behaviour of thermal oxidation treated as well as untreated Ti6Al4V alloy had been investigated using an MRH-3 tribometer in rolling-sliding motion under lubrication conditions. The results show that the treatment can significantly reduce tendency to adhesive wear and enhance the wear resistance of Ti6Al4V alloy. Based on the experimental results, in conjunction with systematic analyses, the wear-reduction mechanisms involved in the thermal oxidation treated material were discussed.
出处
《表面技术》
EI
CAS
CSCD
2008年第6期18-20,23,共4页
Surface Technology
