期刊文献+

ABAQUS在冰箱箱体发泡模设计中的应用 被引量:4

Application of ABAQUS software in design of foam mould for ice box body
下载PDF
导出
摘要 针对板材厚度降低导致发泡过程中箱体内壳局部变形等质量缺陷,发泡模与箱体内壳的配合准确程度是主要因素。基于有限元软件ABAQUS对箱体内壳冷却变形进行了模拟分析,计算了X向和Y向的关键点变形和相对变形量。在传统模具设计的基础上,提出了发泡模设计的补偿算法,采用该算法对某型号冰箱箱体发泡模进行了设计,生产实践证明完全可行。 Defects like local deformation in an ice box inner casing during foaming process may occur due to decrease of plate thickness; and the main factors were found to be the accurate degree of titling between the foam mould and the box inner casing. The cooling deformation of the box inner casing was simulated and analyzed based on ABAQUS finite element software. The deformation of key points and relative deformation amount in the X and Y direction were calculated. A compensation algorithm based on conventional designs for foam moulds was proposed that has been applied to the development of a foam mould for an ice box body and demonstrated to be feasible.
出处 《模具工业》 2009年第4期46-50,共5页 Die & Mould Industry
关键词 ABAQUS 发泡 箱体内壳 模具 ABAQUS foaming ice box inner casing mould
  • 相关文献

参考文献3

二级参考文献1

  • 1王勋成,邵敏.有限单元法基本原理与数值方程[M].北京:清华大学出版社,1997年3月

共引文献6

同被引文献23

  • 1张德海,杨培林,李艳芹,王天才,李光亚.关于优化门体工艺设计降低冰箱成本的几点意见[J].家电科技,2004(7):76-77. 被引量:4
  • 2张德海,杨培林.冰箱侧帮变形的有限元分析及改进设计[J].家电科技,2006(12):65-67. 被引量:6
  • 3全国家用电器标准化技术委员会.GB/T8059.2[S].北京:中国标准出版社,1995.
  • 4Jeong Kim, Beom-Soo Kang. Implementation of backward tracing scheme of the FEM for design of initial tubular blank in hydroforming [J]. J. Mater. Process. Technol,2002(125-126):839-848.
  • 5G KERMOUCHE,LOUBET J L,BERGHEAU J M.Extrac- tion of stress-strain curves of elastic-viscoplastic solids using conical/pyramidal indentation testing with applica- tion to polymers[J].Mechanics of Materials.2008,40(1): 271-283.
  • 6SELL C G,HIER J M,DAHOUN A,et al.Video-con- trolled tensile testing of polymers and metals beyond the necking point[J].Journal of Materials Science,1992, 27(1):5031-5039.
  • 7DUFFO P,MONASSE B,HAUDIN J M,et al.Rheology of polypropylene in the solid state[J].Joumal of Materi- als Science,1995,30(1):701-711.
  • 8DUAN Y P.Impact behavior and modeling of engineer- ing polymers[D].Medford/Sommerville City,TUFTS Uni- versity, USA.2001:57-103.
  • 9DUAN Y P,SAIGAL A,GREIF R.Analysis of Multiaxial Impact Behavior of Polymers[J].Polymer Engineering and Science,2002,42(1 ):396-402.
  • 10DUAN Y P,SAIGAL A,GREIF R.Impaet behavior and modeling of engineering polymers[J].Polymer Engineer- ing and Science2003,43(1):112-124.

引证文献4

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部