摘要
通过模压实验研究了不饱和聚酯树脂片状模塑料(SMC)模压成型工艺参数对制品成型质量的影响;以冲击强度为衡量制品性能的定量指标,通过正交实验得到了优化的SMC模压成型工艺参数,分析了各参数对冲击强度的影响,对实际生产具有一定的指导意义。
The effect of forming parameters of SMC on forming quality was researched based on the experiment of die pressing forming. By the quadrature experiment, the best parameters of SMC die pressing forming was obtained and the influence of parameters on impact strength was analyzed. The results was of value for directing the production of SMC die pressing forming.
出处
《工程塑料应用》
CAS
CSCD
北大核心
2009年第4期39-41,共3页
Engineering Plastics Application
基金
重庆市科委资助项目(2005CC32
2005CC34
2008BA3014)
关键词
模压成型
正交实验
成型质量
冲击强度
die pressing forming, quadrature experiment, forming quality, impact strength
