期刊文献+

回收PP增韧性能的初步探索 被引量:1

Preliminary Study on Toughening of Recycled PP
下载PDF
导出
摘要 选用马来酸酐接枝POE、POE和CPE三种助剂,探索其不同含量对回收PP增韧改性的效果。通过大量的试验、测试及微观形貌分析,研究了增韧剂含量与力学性能的关系。结果表明,在0-30%之间随着增韧剂用量的增加,回收PP的强度先提高后降低,韧性则不断提高;用25%马来酸酐接枝POE增韧回收PP综合效果最佳,其拉伸强度、弯曲强度和冲击韧性分别达到了40.77MPa、37.78MPa和24.7KJ/M2。 To improve the toughness, different percentage of Maleic Anhydride Grafted POE, pure POE and CPE were used. Lots of experiments were carried out to obtain the data, and cracked section was also studied. The results show that toughness of recycled PP increased with the increment of toughening agent which was in the range of 0-30%, while strength declined after going up; Maleic Anhydride Grafted POE is the best and its optimum content is 25%. Under the toughening treatment the tensile strength is 40.77MPa, the flexural strength is 37.78MPa and the impact toughness can reach 24.7KJ/ M2.
出处 《材料科学与工程学报》 CAS CSCD 北大核心 2009年第2期258-261,共4页 Journal of Materials Science and Engineering
基金 校企横向预研课题资助项目(1006-264006)
关键词 回收PP POE CPE 增韧 recycled PP POE CPE toughening
  • 相关文献

参考文献7

  • 1Huang Le-Ping, Zhou Xing-Ping, Cui Wei, Xie Xiao-Lin, Tong Shen-Yi. Toughening effect of maleic anhydride grafted linear low density polyethylene on linear iow density polyethylene[J]. Journal of Materials Science, 2008, 43 (12) : 4290-4296.
  • 2Wang Wen-hai, Sadeghipour Keya, Baran George. Finite element analysis of the effect of an interphase on toughening of a particle-reinforced polymer composite[J]. Applied Science Manufaeturing, 2008, 39(6):956-964.
  • 3Wang Zhao..bo, Hao Wen-peng, Zhang Zhi-kun, Cui Zuo-lin. Toughening of Propylene-ethylene Copolymer/Calcium Carbonate Composites with High-Density Polyethylene [J] Journal of Macromoleeular Science, 2008, 47(3) : 576-588.
  • 4Sharma, Rajdeep, Boyce, Mary C., Socrate, Simona. Micromechanics of toughening in ductile/brittle polymeric microlaminates: Effect of volume fraction [J]. Journal of Solids & Structures, 2008, 45(7/8):2173-2202.
  • 5张明,张云灿,吕忆农.相容性对PA66/POE共混材料形态、微结构及力学性能的影响[J].复合材料学报,2005,22(5):113-119. 被引量:14
  • 6Boccaccini, D. N. , Cannio, M. , Volkov-Husoviae, T. D. , Dlouhy, L, Romagnoli, M., Veronesi, P., Leonelli, C. Assessment of viscoelastic crack bridging toughening in refractory materials [J]. Journal of the European Ceramic Society, 2008, 28(10):1941-1951.
  • 7魏刚,彭娅,黄锐.官能化聚烯烃弹性体增韧PBT[J].合成树脂及塑料,2006,23(1):29-32. 被引量:12

二级参考文献17

  • 1张云灿,陈瑞珠,张胜利.填充HDPE复合材料基体结晶形态的控制因素[J].复合材料学报,1996,13(3):12-20. 被引量:10
  • 2Bucknall C B. Toughened Plastics [M]. London: Applied Science Pub, 1977. 1-450.
  • 3Flexman E A. Impact behavior nylon-66 compositions:Ductile-brittle transition[J]. Polym Eng Sci, 1979, 19(8):564-569.
  • 4Borggreve R J M, Gaymans R J, Schuijer J, et al. Brittletough transition in nylon-rubber blends: Effect of rubber concentration and particle size [J]. Polymer, 1987, 28(8):1489-1496.
  • 5Wu S. Impact fracture mechanisms in polymer blends:Rubber-toughened nylon[J]. J Polym Sci Polym Phys Ed,1983, 21(5): 699-716.
  • 6Hobbs S Y, Bopp R C, Watkins V H. Toughened nylon resins [J]. Polym Eng Sci, 1983, 23(7): 380-389.
  • 7Wu S. Phase structure and adhesion in polymer blends: A criterion for rubber toughening [J]. Polymer, 1985, 26(11): 1855-1863.
  • 8Wu S. A generalized criterion for rubber toughening: The critical matrix ligament thickness [J]. J Appl Polym Sci,1988, 35(2): 549-561.
  • 9Muratoglu O K, Argon A S, Cohen R E. Toughening mechanism of rubber-modified polyamides [J]. Polymer, 1995,36(5): 921-930.
  • 10Bartczak Z, Argon A S, Cohen R E, et al. Toughness mechanism in semi-crystalline polymer blends: Ⅰ. High-density polyethylene toughened with rubbers [J]. Polymer, 1999,40(9): 2331-2346.

共引文献23

同被引文献11

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部