期刊文献+

CS-Ⅱ型重油催化裂化进料喷嘴的工业应用 被引量:5

Commercial application of CS-Ⅱ type heavy oil FCC feed atomizing nozzle
下载PDF
导出
摘要 沈阳石蜡化工有限公司450 kt/a催化裂解装置在2007年9月大修时,换用CS-Ⅱ型重油催化裂化进料喷嘴。在原料性质变差,其它操作条件不变的情况下,液化石油气、汽油和柴油收率之和比改造前提高了1.47个百分点,生焦率降低了0.93个百分点,干气产率降低了0.47个百分点,产品性质基本没有变化,装置运行平稳。CS-Ⅱ型重油催化裂化进料喷嘴的应用,增加了目的产品收率,提高了装置处理能力,降低了装置综合能耗,经济效益达1 307.51×104RMB$。 The feed atomizing nozzle of a 450,000 TPY catalytic cracking unit in Shenyang Wax Chemical Co. , Ltd was replaced with the CS-Ⅱ heavy oil FCC feed atomizing nozzle during turnaround in September 2007. When the operating conditions remained unchanged and the feedstock properties were worse, the total yield of LPG, gasoline and diesel oil rose by 1.47% , the coke make was reduced by 0.93% and dry gas pro- duction was lowered by 0.47%. The unit operation is stable and there are no substantial changes in product properties. Therefore, the application of CS- Ⅱ heavy-oil FCC feed atomizing nozzle has increased the product yield, elevated unit capacity and reduced unit comprehensive energy consumption. The annual economic benefits is 13. 0751 million Yuan RMB.
作者 郑洪文 闫涛
出处 《炼油技术与工程》 CAS 2009年第5期37-39,共3页 Petroleum Refinery Engineering
关键词 进料喷嘴 催化裂解 催化裂化 工业应用 feed atomizing nozzle, catalytic splitting, catalytic cracking, commercial application
  • 相关文献

参考文献2

二级参考文献10

  • 1范怡平,蔡飞鹏,时铭显,徐春明.催化裂化提升管进料段内气、固两相混合流动特性及其改进[J].石油学报(石油加工),2004,20(5):13-19. 被引量:24
  • 2Mauleon. Process for the catalytic cracking of hydrocarbons in a fluidized bed and their application. United States Patent,4883583. 1989
  • 3Yiping Fan, Sheng Ye. Gas-solid two-phase flow in FCC riser.AICHE J, 2002,48:1869-1887
  • 4Lomas, D. A. FCC Riser with Transverse Feed Injection [P],US, 5139748. 1992.
  • 5Mauleon,J. L., M. Demar, and J. B. Sigaud. The Method for the Injection of Catalyst in a Fluid Catalytic Cracking Process,Especially for Heavy Feedstock[P], US, 4832825. 1989.
  • 6Maroy, J. D.. Process and Apparatus for Contacting a Hydrocarbon Feedstock with the Hot Solid Particles in Tubular Reactor with a Rising Fluidizecl Bed[P] ,US,5348644. 1994.
  • 7Thelogs, K. N. , I. D. Nikou, A. I. Lygeros et al. On the Simulation of Fluid Catalytic Cracking Riser- type Reactors [D],北京,1996.北京 :CFB-5 preprints,1996. MSS5 1-6.
  • 8Fan, Y. P., S. Ye, C.X. Lu, et al. Gas--Solid Two Phase Flow in FCC Riser[J], AIChE J. , 2002,48 (9) : 1869-1887.
  • 9范怡平.新型催化裂化提升管进料混合段结构的开发[D],北京:博士后出站报告,石油大学(北京),2003.
  • 10范怡平,叶盛,卢春喜,时铭显.提升管反应器进料混合段内气固两相流动特性(Ⅰ)实验研究[J].化工学报,2002,53(10):1003-1008. 被引量:30

共引文献10

同被引文献53

引证文献5

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部