摘要
滤棒自动生产线的滤棒固化储存装置在使用中存在两个问题:①固化储存库结构不合理,当输送带磨损需要更换时,安装维修不便;②滤棒固化储存装置与其他设备对接时,需要现场配装安装孔,加工精度低,且安装调度时间长。为此,研制了YF172型滤棒固化储存输送装置,该装置主要采用了悬臂结构固化储存库和悬臂式接口部件。实际应用结果表明,①YF172型采用的悬臂结构固化储存库除去了前立柱的阻挡,结构简单合理,方便了磨损输送带的更换;②可调式悬臂结构的接口部件,伸入到对接机中的悬臂长度可在0～65 mm内连续调整,有效解决了固化储存装置与设备的对接问题,不需在安装现场配做安装孔,安装调试时间由原来的1 d左右缩短到2 h,且提高了设备的安装精度。
Two problems exist in a filter rod curing, storing and conveying system： 1 ） inconvenient for installation, maintenance and replacement of worn links; 2） connecting holes had to be made at the time of machine installation in site to connect with other machines. It was a tough job and time-consuming. Therefore, YF172 filter rod curing, storing and conveying system was designed, wherein the curing reservoir and connecting assembly were of cantilever structures. The results of practical application indicated that： 1 ） the curing reservoir of cantilever structure dispensed with the front pillars, this simple and reasonable structure facilitated the replacement of worn links ; 2） the cantilever structure of the linking assembly was adjustable in the range of 0 to 65 mm, which effectively solved the question of connecting the system with other machines and shortened the installation time from one day to two hours, and the installation precision was also improved.
出处
《烟草科技》
EI
CAS
北大核心
2009年第6期23-25,共3页
Tobacco Science & Technology
关键词
滤棒固化
储存输送装置
接口部件
悬臂结构
YF172型
Filter rod curing
Storing and conveying system
Connecting assembly
Cantilever structure
YF172
