期刊文献+

温度对换热器析晶污垢形成的影响 被引量:21

Effect of temperature on formation of crystalline fouling on heat exchanger surface
下载PDF
导出
摘要 利用X射线衍射(XRD)和扫描电镜(SEM)等手段研究了温度对碳酸钙析晶污垢形成类型与微观结构的影响。结果表明:温度不但影响析出的碳酸钙污垢的类型,也影响析出相的晶格常数和析出粒子尺寸;温度较低时碳酸钙污垢主要为方解石晶相,随着温度的升高析出的文石晶相逐渐增加;同时低温沸腾产生的扰动可以有效地减小碳酸钙污垢粒子的聚集尺寸。 The effect of temperature on the crystalline structure and morphology of calcium carbonate fouling was investigated by X-ray diffraction analysis and SEM observation. The experimental results indicated that temperature not only affected the crystalline type of fouling, but also affected the lattice parameter and particle size of the precipitated phase. Calcite was the main precipitated phase at a lower temperature, and the amount of aragonite would increase with increasing temperature. The disturbance induced by low temperature boiling could reduce the size of aggregating fouling particle.
出处 《化工学报》 EI CAS CSCD 北大核心 2009年第8期1938-1943,共6页 CIESC Journal
基金 国家重点基础研究发展计划项目(2007CB206900) 山东省自然科学基金重点资助项目(Z2007F05)~~
关键词 碳酸钙 污垢 晶格常数 粒子尺寸 calcium carbonate fouling lattice parameter particle size
  • 相关文献

参考文献25

  • 1Steinhagen R, Muller-Steinhagen H, Maani K. Problems and costs due to heat exchanger fouling in New Zealand industries. Heat Transfer Engineering, 1993, 14 (1) : 19-30.
  • 2Budair M O, Khan M S, Zubair S M, Sheikh A K, Quddus A. CaCO3 scaling in AISI 316 stainless steel tubes--effect of thermal and hydraulic parameters on the induction time and growth rate. Heat Mass Transf., 1998, 34:163-170.
  • 3Khan M S, Budair M O, Zubair S M. A parametric study of CaCO3 scaling in AISI 316 stainless steel tubes. Heat Mass Transf. , 2001, 38:115-121.
  • 4Khan M S, Zubair S M, Budair M O, Sheikh A K, Quddus A. Fouling resistance model for prediction of CaCOa scaling in A1SI 316 tubes. Heat Mass Transf. , 1996, 32:73-79.
  • 5Fan C, Cho Y I. Microscopic observation of calcium carbonate particles: validation of an electronic anti fouling technology. Int. Commun. HeatMass Transf. , 1997, 24: 747-756.
  • 6Won Tae K, Cho Y I. A study of scale formation around air bubble attached on a heat-transfer surface. Int. Commun. HeatMass Transf., 2002, 29: 1-14.
  • 7Cho Y I, Byung-Gap C. Validation of an electronic antifouling technology in a single-tube heat exchanger. Int. J. HeatMass Transf. , 1999, 42:1491-1499.
  • 8Cho Y I, Byung-Gap C, Drazner B J. Electronic anti fouling technology to mitigate precipitation fouling in plate- and frame heat exchangers. Int. J. Heat Mass Transf. , 1998, 41:2565-2571.
  • 9Won Tae K, Cheolho B, Young I C. A study of CaCOa fouling with a microscopic imaging technique. Int. J. Heat Mass Transf., 2002, 45:597-607.
  • 10Ishiguro R, Sakashita H, Sugiyama K, Takamura Y. Microscopic study of CaCO3 scaling on heat transfer surfaces. JSME Int. J.B, Fluids Therm. Eng., 1993, 36 : 644-650.

二级参考文献63

共引文献69

同被引文献206

引证文献21

二级引证文献89

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部