摘要
以正庚烷为碳氢燃料模型化合物,考察其在超临界条件下的裂解和结焦情况,着重探讨了裂解温度和雷诺数(Re)对裂解反应的影响.在4.0MPa和500～650℃范围内,随着反应温度升高,正庚烷的裂解转化率大幅度提高,裂解反应及其产物的二次反应使结焦前驱物增加,最终导致结焦严重;在超临界条件下,提高流体的湍动程度,有利于抑制结焦.采用扫描电镜(SEM)、透射电镜(TEM)、差示扫描量热(DSC)和X射线衍射(XRD)等技术分析固体焦的形貌特性,结果表明正庚烷裂解结焦主要以金属催化作用产生的丝状焦为主,丝状焦的生长是不锈钢发生渗碳现象的重要原因.
The pyrolysis and coking of n-heptane, as a model compound of hydrocarbon fuels, were inves- tigated under supercritical conditions. The influences of temperature and Reynolds number （Re） on the cracking reactions were discussed. The conversion of n-heptane under 4.0 MPa increased evidently with temperature rising from 500 to 650 ℃. The thermal cracking and the secondary reactions of cracking prod- ucts led to the increase of the precursors of coking, and finally resulted in coking seriously. Increasing the turbulence of the effluent flow could effectively inhibit coke formation. The coke samples have been char- acterized by the techniques of scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, differential scanning calorimetry （DSC） and X-ray diffraction （XRD）. The analysis results showed that the filamentous coke formed during the pyrolysis of n-heptane resulted from metal catalysis and the formation of the filamentous coke might be the major factor of the carburization of the stainless steel.
出处
《化学学报》
SCIE
CAS
CSCD
北大核心
2009年第15期1759-1764,共6页
Acta Chimica Sinica
基金
国家自然科学基金(No.20573096)
浙江省自然科学基金(No.Y404329)资助项目
关键词
碳氢燃料
超临界
裂解
结焦
渗碳
hydrocarbon fuel
supercritical condition
pyrolysis
coking
carburization
