期刊文献+

Research on the Mechanism of Accelerator for Photocurable Resin in 3D Printing 被引量:1

Research on the Mechanism of Accelerator for Photocurable Resin in 3D Printing
下载PDF
导出
摘要 The photopolymerization kinetics of cycloaliphatic epoxide and oxetane with accelerators were investigated with Real-time Fourier transform infrared spectroscopy(RT-FTIR).The consumption rates of epoxy group and oxetane group as a function of time were obtained by monitoring of the absorption peaks in the 789 cm-1 and 981 cm-1.The effect of accelerators type and the accelerating mechanism were discussed.In general,benzyl alcohol and its analogues with electron-donating substituents are useful accelerators for the cationic polymerization of cycloaliphatic epoxide and oxetane.Activated monomer mechanism and free-radical chain-induced decomposition of onium salt cationic photoinitiator account for the observed accelerating effect on the polymerization rate. The photopolymerization kinetics of cycloaliphatic epoxide and oxetane with accelerators were investigated with Real-time Fourier transform infrared spectroscopy(RT-FTIR).The consumption rates of epoxy group and oxetane group as a function of time were obtained by monitoring of the absorption peaks in the 789 cm-1 and 981 cm-1.The effect of accelerators type and the accelerating mechanism were discussed.In general,benzyl alcohol and its analogues with electron-donating substituents are useful accelerators for the cationic polymerization of cycloaliphatic epoxide and oxetane.Activated monomer mechanism and free-radical chain-induced decomposition of onium salt cationic photoinitiator account for the observed accelerating effect on the polymerization rate.
出处 《Journal of Donghua University(English Edition)》 EI CAS 2009年第1期16-20,共5页 东华大学学报(英文版)
基金 Natural Science Foundation of Hubei Province of China(No.2005ABA181) National Innovation Fund for Small Technology-based Firms(No.05C26214201059)
关键词 ACCELERATOR cationic photopolymerization cycloaliphatic epoxide OXETANE three-dimensional printing Real-time FTIR 加速器 光固化树脂 三维打印 傅里叶变换红外光谱 机制 阳离子光引发剂 聚合反应动力学 环氧丙烷
  • 相关文献

参考文献10

  • 1Di mitrov D,Van Wijck W,Schreve K,et al.Investigating the Achievable Accuracy of Three Di mensional Printing[].Rapid Prototyping Journal.2006
  • 2Gothait Hanan.Systemand Method for Three Di mensional Printing[].WO -A.2001
  • 3Crivello J V,Kong S,Jang M.Cationic Polymerization: New Developments and Applications[].Macromolecular Symposia.2004
  • 4Crivello J V.Accelerators for Cationic Photopolymerizations[].US -A.2003
  • 5Gomurashvili Z,Crivello J V.Phenothiazine Photosensitizers for Onium Salt Photoinitiated Cationic Polymerization[].Journal of Polymer Science Part A — Polymer Chemistry.2001
  • 6Crivello J V,Ma J,Jiang F,et al.Advances inthe Design of Photoinitiators,Photo-sensitizers and Monomers for Photoinitiated Cationic Polymerization [ J ][].Macromolecular Symposia.2004
  • 7James V Crivello.The discovery and development of onium salt cationic photoinitiators[].Journal of Polymer Science Part A:Polymer Chem istry.1999
  • 8Dimitrov D,,Schreve K,De Beer N.Advances in three dimensional printing-state of the art and future perspectives[].Rapid Prototyping Journal.2006
  • 9John Lembo.Three-Dimensional Printing[].Advanced Materials.2003
  • 10Jung-Dae Cho and Jin-Who Hong.Photo-curing kinetics for the UV-initiated cationic polymerization of a cycloaliphatic diepoxide system photosensitized by thioxanthone[].European Polymer Journal.2005

同被引文献10

  • 1Bayramog lu G,Kahraman M V,Kayaman-Apohan N,et al.Synthesis and Characterization of UV-Curable Dual Hybrid Oligomers Based on Epoxy Acrylate Containing Pendant Alkoxysilane Groups. Progress in Organic Coatings . 2006
  • 2Crivello J V,,Ortiz R A.Synthesis of Epoxy Monomers that Undergo Synergistic Photopolymerization by a Radical-Induced Cationic Mechanism. Journal of Polymer Science Part A: Polymer Chemistry . 2001
  • 3Sangermano M,Malucelli G,Morel F,et al.Cationic Photopolymerization of Vinyl Ether Systems: Influence of the Presence of Hydrogen Donor Additives. European Polymer Journal . 1999
  • 4Sperling L H,Mishra V.Polymer Materials Encyclopedia. . 1996
  • 5American National Standards Institute.The Method for Tensile Properties of Thin Plastic Sheeting. ASTM D882-91 . 1993
  • 6ParkYJ,LimDH,KimHJ,etal.UV -and thermal-curing behaviors of dual -curable adhesives based on epoxy acrylate oligomers. International Journal of Adhesion and Adhesives . 2009
  • 7CRIVELLO J V,ORTIZ R A.Design and synthesis ofhighly reactive photopolymerizable epoxy monomers. Journal of Polymer Science,Part A:Polymer Chemistry . 2001
  • 8Massmitsu Shirai.Reworkable UV curing materials. Progress in Organic Coatings . 2007
  • 9Sangermano M,Lak N,Malucelli G,et al.UV-curing and characterization of polymer-clay nanocoatings by dispersion of acrylate-funtionalized organoclays. Progress in Organic Coatings . 2008
  • 10Wang F et al.Study on microstructure of UV-curable polyurethane acrylate?. lms.Prog.Org.Coat . 2008

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部