期刊文献+

LY12铝合金硬质阳极氧化陶瓷膜形貌及形成机理研究 被引量:3

Study on Morphology and Formation Mechanics of Black Ceramic Coatings Preapared by Hard Anodic Oxidation on LY12 Al Alloy
下载PDF
导出
摘要 为了提高LY12铝合金的表面性能,在硫酸体系电解液中通过硬质阳极氧化法在LY12铝合金表面制备了黑色陶瓷膜。利用扫描电镜和X射线衍射仪研究了陶瓷膜微观形貌和结构。结果表明,陶瓷膜表面存在大量的孔洞,在部分孔洞中存在岛状物。孔洞是由于在进行阳极氧化时含铜合金相与电解液发生反应溶解形成的,其中未溶解的在氧化时形成孔洞中间的岛屿状物。陶瓷膜由大量的-γA l2O3及少量的-αA l2O3组成。LY12铝合金表面陶瓷膜的特殊形貌对封孔工艺提出了严格要求。 In order to improve the surface properties of LY12 Al alloy, black ceramic coatings were prepared on LY12 Al alloy substrate through the hard anodic oxidation technique in an electrolyte of sulfuric acid solution. The morphology and composition of coatings were investigated by X-ray diffraction and scanning electron microscopy. It is found there exist large quantity cavity on the surface of ceramic coatings and there has some island structure in partial cavity. The copper-bearing alloy phase is solution when react with electrolyte forming the cavity while the anodic oxidation proceeding, rest of the alloy forming island in the cavity. The phase composition in the coating is composed of g-Al203 and a little a-Al2O3. The special morphology on LY12 Al-alloy surface sets strict demands on an advanced seal technology.
出处 《表面技术》 EI CAS CSCD 北大核心 2009年第5期47-49,共3页 Surface Technology
关键词 氧化膜 微观形貌 结构 封孔 LY12铝合金 Oxidation coatings Micro morphology Composition Seal LY12 Al alloy
  • 相关文献

参考文献4

二级参考文献27

共引文献47

同被引文献25

引证文献3

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部