期刊文献+

基于有限元法的正交各向异性复合材料结构材料参数识别 被引量:12

Material parameter identification for orthotropic composite structure by the finite element method
原文传递
导出
摘要 以大型商用有限元软件ABAQUS为计算平台,提出了正交各向异性复合材料结构材料参数的识别方法。将材料参数识别的问题转化为极小化目标函数的问题,其中目标函数定义为测量位移与有限元计算的相应位移之差的平方和。采用Levenberg-Marquardt方法极小化目标函数,其中灵敏度的计算基于复合材料的有限元离散结构的求解方程对识别的材料参数求导。数值算例表明本文中提出的方法是有效的。在识别参数过程中,参数的初值以及搜索范围的确定对于识别结果有着重要影响。因此必须充分利用材料参数的先验信息。ABAQUS是高效可靠的商用有限元软件,提出的参数识别方法基于这类商用软件,因而该方法有很强的实用性。 Based on the computing platform of the finite element method commercial software ABAQUS, a parameter identification method was developed for orthotropic composite structures. The material parameter identification problem was formulated as the problem of minimizing the objective function defined as a square sum of differences between the measured and calculated data on displacements. Levenberg-Marquardt method, in which the sensitivity analysis was based on the differentiation of the discretized algebraic finite element matrix equations with respect to material parameter, was used to solve the minimization problem. Numerical example shows that the proposed method for parameter identification is feasible and effective. The initial values and upper and lower bounds of parameters identified play an important role in the parameter identification process. Therefore, a priori information of parameters should be used as much as possible. ABAQUS is effective and reliable commercial software for the finite element method, and hence the proposed method based on such a kind of software has strong practicability.
出处 《复合材料学报》 EI CAS CSCD 北大核心 2009年第4期197-202,共6页 Acta Materiae Compositae Sinica
基金 广西科学基金项目(桂科自0728005) 广西教育厅科研项目(桂教科研[2006]26号)
关键词 正交各向异性复合材料 有限元法 参数识别 灵敏度分析 orthotropic composite finite element method parameter identification sensitivity analysis
  • 相关文献

参考文献14

  • 1Wang W T, Kam T Y. Material characterization of laminated composite plates via static testing[J].Composite Structures,2000, 50(4):347-352.
  • 2Lecompte D, Smits A, Sol H, Vantomme J, Hemelrijck D V. Mixed numerical- experimental technique for orthotropic parameter identification using biaxial tensile tests on cruciform specimens [J]. International Journal of Solids and Structures, 2007, 44(5): 1643-1656.
  • 3Rikards R, Chate A. Identification of elastic properties of composites by method of planning of experiments [J]. Composite Structures, 1998, 42(3): 257-263.
  • 4Pedersen P, Frederiksen P S. Identification of orthotropic material moduli by a combined experimental- numerical method [J]. Measurement, 1992, 10(3): 113-118.
  • 5Frederiksen P S. Experimental procedure and results for the identification of elastic constants of thick orthotropic plates[J]. Journal of Composite Materials, 1997, 31(4): 360-382.
  • 6Rikards R, Chate A, Gailis G. Identification of elastic properties of laminates based on experimental design [J].International Journal of Solids and Structures, 2001, 38 (30/ 31): 5097-5115.
  • 7Meuwissen M H H, Oomens C W J, Baaiiens F P T, et al. Determination of the elasto - plastic properties of aluminium using a mixed numerical - experimental method[J]. Journal of Materials Processing Technology, 1998, 75(1/3): 204-211.
  • 8Ayorinde E O. Elastic constants of thick orthotropic composite plates[J]. Journal of Composite Materials, 1995, 29(8): 1025-1039.
  • 9Huang L X, Sun X S, Liu Y H, Cen Z Z. Parameter identification for two dimensional orthotropic material bodies by the boundary element method [J]. Engineering Analysis with Boundary Elements, 2004, 28(2):109-121.
  • 10孙秀山 ,黄立新 ,刘应华 ,岑章志 ,方东平 .二维正交各向异性结构弹塑性问题的边界元分析[J].复合材料学报,2005,22(3):156-161. 被引量:3

二级参考文献19

  • 1Sun Xiushan, Cen Zhangzhi.FURTHER IMPROVEMENT ON FUNDAMENTAL SOLUTIONS OF PLANE PROBLEMS FOR ORTHOTROPIC MATERIALS[J].Acta Mechanica Solida Sinica,2002,15(2):171-181. 被引量:4
  • 2张承宗,杨光松.各向异性板结构横向弯曲一般解析解[J].力学学报,1996,28(4):429-440. 被引量:41
  • 3Lekhnitskii S G. Theory of Elasticity of an Anisotropic Body[M]. Moscow: Mir Publishers, 1981.
  • 4Hinton E, Owen D R J. Finite Element Software for Plates and Shells [M]. Swansea: Prinerige Press Ltd, 1984.
  • 5Hill R. A theory of the yielding flow of anisotropic metals[J]. Proceedings of the Royal Society of London: Series A,1948, 193: 281-297.
  • 6Whang B. Elasto-Plastic Orthotropic Plates and Shells [A].In: Rowan W H, Hackett R M, eds. Proceedings of the Symposium on Application of the Finite Element Method in Civil Engineering [C]. San Francisco: ASCE, 1969. 481-515.
  • 7Owen D R J, Figueiras J A. Elasto-plastic analysis of anisotropic plates and shells by the semiloof element [J]. International Journal for Numerical Methods in Engineering,1983, 19(4): 521-539.
  • 8Karakuzu R, Ozcan R. Exact solution of elasto-plastic stresses in a metal-matrix composite beam of arbitrary orientation subjected to transverse loads [J]. Composites Science and Technology, 1996, 56(12): 1383-1389.
  • 9Rizzo F J, Shippy D J. A method for stress determination in plane anisotropic elastic bodies [J]. Journal of Composite Materials, 1970, 4(1): 36-61.
  • 10Sun X S, Huang L X, Liu Y H, etal. Elasto-plastic analysis of two-dimensional orthotropic bodies with the boundary element method [J]. Computers, Materials & Continua, 2004,1(1): 91-106.

共引文献5

同被引文献102

引证文献12

二级引证文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部