期刊文献+

AlSi7MgBe铝合金的固溶处理探讨

Probe into solution treatment on AlSi7MgBe aluminum alloy
下载PDF
导出
摘要 通过金相分析、SEM和EDS等方法,研究AlSi7MgBe铝合金固溶处理过程中Si相和Fe相的变化。结果表明,固溶处理过程中Si相和Fe相组织变化可概括为尖端钝化、溶断和粒化,并且与常规T5热处理制度相比,固溶处理后的力学性能得到较大的提高。 Changes of si phase and Fe phase were researched in the course of solution treatment on AlSi7MgBe aluminum alloy through such methods as metallographic analysis,SEM and EDS.The results showed that changes of Si phase structure and Fe phase structure in solution treatment could be summarized as point passivation,fusing and granulation.They also showed that mechanical properties were largely improved after solution treatment than these in regular T5 heat treatment system.
出处 《轻合金加工技术》 CAS 北大核心 2009年第10期44-48,共5页 Light Alloy Fabrication Technology
关键词 AlSi7MgBe合金 固溶处理 SI相 Fe相 AlSi7MgBe aluminum alloy solution treatment Si phase Fe phase
  • 相关文献

参考文献6

二级参考文献46

  • 1张迎晖,马宏声,孝云祯.温轧态Al-Sc二元合金的再结晶[J].东北工学院学报,1993,14(6):576-580. 被引量:6
  • 2EЛAГИH B И 谢燮揆(译).-[J].轻金属,1993,(3):54-54.
  • 3吴源道.铍[M].北京:冶金工业出版社,1988.1-10.
  • 4谢燮揆(译),轻金属,1993年,3期,54页
  • 5Shivkumar S, Keller C, Apelian D. AFS Trans, 1990; 98:905
  • 6Kang H G, Kida M, Miyahara H, Ogi K. AFS Trans, 1999;107:507
  • 7Kaczorowski M, Bindas J. Aluminium, 1994; 9/10:566
  • 8Crowell N, Shivkumar S. AFS Trans, 1995; 103:721
  • 9Caceres C H, Wang Q G. AFS Trans, 1996; 104:1039
  • 10Shivkumar S, Wang L, Keller C. AFS Trans, 1995; 103:705

共引文献95

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部