摘要
基于地质强度指标GSI体系和Hoek-Brown强度准则,研究岩体强度及变形模量时没有考虑到结构面产状对工程岩体参数的影响.结合三峡工程地下厂房,根据围岩开挖面与结构面分布的空间位置关系,确定了结构面分布对围岩结构等级SR的影响系数,改进了GSI体系中围岩SR的统计方法,确定了围岩的等效变形模量和强度参数.研究表明,改进后的GSI体系求解的围岩弹性区等效弹性模量、扰动区等效变形模量和粘聚力分别减小了约15%、8%和28%的误差.
The influence of orientation of structure plane on parameters of rock mass is neglected in the study on the strength and deformation modulus based on geological strength index （GSI） system and Hoek-Brown strength rule. In this paper, as a case of underground powerhouse in the Three Gorges Project, the influence coefficient between the distribution of structure plane and structure rating （SR） of surrounding rock is calculated based on the space distribution character of excavated surface and structure plane; the statistical method of SR in the GSI system applied for large underground caverns is modified; and the experiential estimates of equivalent deformation modulus and strength parameters of surrounding rock are acquired. The investigations show that the calculative errors of the equivalent elastic modulus in elastic zone, deformation modulus and cohesive strength in disturbed zone of surrounding rock based on modified GSI system decreased by about 15% , 8% , 28% respectively.
出处
《地球科学（中国地质大学学报）》
EI
CAS
CSCD
北大核心
2009年第6期1030-1036,共7页
Earth Science-Journal of China University of Geosciences
基金
教育部博士点新教师基金项目(No.200806111012)
中国博士后科学基金项目(No.20080440703)
地质灾害防治与环境保护国家重点实验室(成都理工大学)开放基金项目(No.GZ2007-13)
关键词
地质强度指标
变形模量
强度参数
结构面产状
地下厂房
工程地质.
geological strength index （GSI）
deformation modulus
strength parameters
orientation of structure plane
underground powerhouse
engineering geology.
