期刊文献+

制备工艺对多孔SiC陶瓷/Zr基非晶合金复合材料准静态压缩性能的影响 被引量:1

Effect of Preparative Processes on the Quasi-Static Compressive Properties of Porous SiC Ceramic/Zr-Based Amorphous Composites
下载PDF
导出
摘要 利用WDW-E100D型万能试验机和S-4800场发射扫描电镜,研究了不同工艺制备的多孔SiC陶瓷/Zr基非晶合金复合材料的准静态压缩性能和断口形貌特征.结果表明:制备工艺决定多孔SiC陶瓷/Zr基非晶合金复合材料的准静态压缩强度,当工艺参数非晶合金浇注温度为860℃,浇注后保温6 min时最佳.多孔SiC陶瓷/Zr基非晶合金复合材料的准静态压缩断裂为脆性断裂.断口形貌特征主要包括多孔SiC陶瓷产生解理台阶,Zr基非晶合金产生尖脊状、细脉状等不同形态的脉状花样. The quasi-static compressive properties and the fracture morphology of 4 kinds of porous SiC ceramics/Zr-base amorphous alloy composites were investigated with the WDW-E100D testing machine and the S-4800 scanning electronic microscope(SEM).The results suggested that the preparation decided the quasi-static mechanic properties of porous SiC ceramics/Zr-base amorphous alloy composite.The best parameter showed that the Zr-base amorphous alloy was cast at 860 ℃ and kept 6 minutes after cast.The fracture mode of the composite showed brittle fracture under the quasi-static compress load.The fracture morphology characteristics included the cleavage steps appear in ceramic and the Zr-base amorphous alloy with thin vein pattern and ridge vein pattern.
出处 《北京理工大学学报》 EI CAS CSCD 北大核心 2009年第10期906-909,共4页 Transactions of Beijing Institute of Technology
基金 国家部委预研项目(A2220060057)
关键词 多孔SiC陶瓷 ZR基非晶合金 复合材料 准静态压缩 脉状花样 porous SiC ceramics Zr-base amorphous alloy composite quasi-static compression vein pattern
  • 相关文献

参考文献6

二级参考文献23

  • 1史可顺.多孔陶瓷制造工艺及进展[J].硅酸盐通报,1994,13(3):38-44. 被引量:31
  • 2曾美云,王树森,王志忠.分子筛炭复合膜陶瓷支撑体的研究[J].北京工业大学学报,1995,21(3):82-88. 被引量:9
  • 3[1]Saidi A, et al. Characteristic of the combustion synthesis of TiC and Fe-TiC composites [J]. Journals of Materials Science, 1994, 29: 4993-4998
  • 4[2]Subrahmanyam Jandhyala, et al. Combustion synthesis of MoSi2-SiC composites [J]. Journal of.American Ceramic Society. 1995, 78(2): 487-490.
  • 5[3]Pampuch R, et al. Solid combustion synthesis of β-SiC powders [J]. Materials Research Bulletin, 1987, 22: 1225-1231.
  • 6[4]Torres R D, et al. Joining NiAl using simultaneous combustion synthesis and pressure [J]. Sctipta Metallurgica et Materialia, 1994, 30(4): 463-468.
  • 7[5]Bhaduri S B. Thermodynamic assessment for synthesizing transition metal silicides by the combustion synthesis process [J]. Sctipta Metallurgica et Materialia, 1992, 27: 1277-1281.
  • 8[6]Roberts P, Knackstedt M A. Mechanical and transport properties of model foamed solids [J]. Journal of Materials Science Letters, 1995(14): 1357-1359.
  • 9[7]Ostrowski Thomas, Rodel Jurgen. Evolution of mechanical properties of porous alumina during free sintering and hot pressing [J]. Journal of American Ceramic Society, 1999(11): 3080 -3086.
  • 10[8]Varma Arvind, et al. Combustion synthesis of advanced materials [J]. Chemical Engineering Science, 1992, 47: 2179-2194.

共引文献23

同被引文献5

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部