期刊文献+

微型推进器流场数值模拟 被引量:3

Numerical Simulation of Micro Thruster Flows
下载PDF
导出
摘要 深入研究微喷管内流场性能有助于微推进系统的优化设计。利用微喷管内流动与壁面传热的耦合计算,对微喷管流场进行数值模拟。对喷管内流体模拟采用直接蒙特卡罗法,壁面材料热响应采用瞬时热传导方程进行建模,并用有限差分法求解。研究结果表明,针对高温流体,分别以壁面固定温度加载和以时时更新的热流密度加载壁面材料,流场马赫数、温度和压力显现出较大差异,较高的压力能提高微喷管的推进效果,但高压力也使微喷管的热损失增加。 Further study on flow field character in micro nozzle will contribute to optimize the design of micro propulsion system. The coupling calculation of thermal-fluid in the simulation of micro-nozzle and mural heat transfer are adopted. The gas flow solution is modeled by the direct simulation Monte Carlo method. The thermal response of mural material is modeled by the transient heat conduction equation which is solved by the finite element method. The Simulation results show that for high-temperature fluid, loading the mural material with the fixed temperature or the heat flux updated time by time, the flow field March number, temperature and pressure show great differences, and the higher pressure can improve the propulsion effect of micro nozzle, but it also increases the heat loss of micro nozzle.
出处 《导弹与航天运载技术》 北大核心 2009年第5期53-56,共4页 Missiles and Space Vehicles
关键词 微喷管 数值模拟 蒙特卡罗法 尺度效应 Micro nozzle Numerical simulation Monte-Carlo method Scale effect
  • 相关文献

参考文献10

  • 1Li S, Freidhoff C B. Fabrication of micronozzles using low-temperature wafer-level bonding with SU-8[J]. Journal of Micromechanics and Microengineering. 2003,13 (5):732-738.
  • 2Choudhuri A R, Baird B B, Golla-Haili S R. Effects of geometry and ambient pressure on micronozzle flow[C]. 37th AIAA Joint Propulsion Conference and Exhibit, 2001.
  • 3Zilic A, Hitt D L, Alexeenko A A. Numerical simulations of supersonic flow in a linear aerospike micronozzle[C].37^th AIAA Fluid Dynamics Conference and Exhibit, 2007.
  • 4Alexenko A A, Lecin D A, Fedosov D A. Coupled thermal-fluid analyses of microthruster flows[C].41^st Aerospace Sciences Meeting and Exhibit. 2003.
  • 5张先锋,刘明侯,李蕾,汪东,陈义良.温度边界条件对微喷管性能的影响[J].中国科学技术大学学报,2008,38(4):394-399. 被引量:5
  • 6陈伟芳,王全利,尹乐.微喷管流动粒子仿真与Navier-Stokes数值模拟比较研究[J].计算力学学报,2005,22(6):677-680. 被引量:4
  • 7Gadepali V V, Lin C X. Navier-stokes modeling of gas flows in a de-laval micronozze[C].44^th AIAA Aerospace Sciences Meting and Exhibit, 2006.
  • 8Louisos W F, Hitt D L. Heat transfer & viscous effects in 2D & 3D supersonic micro-nozzle flows[C]. 37^th AIAA Fluid Dynamics Conference and Exhibit, 2007.
  • 9杨海威,赵阳.拉瓦尔型微喷管性能的DSMC模拟[J].固体火箭技术,2007,30(2):106-109. 被引量:7
  • 10杨海威,赵阳.外形设计对微喷管性能的影响[J].推进技术,2007,28(1):68-72. 被引量:10

二级参考文献30

  • 1方杰,田辉,蔡国飙.N_2O单组元微推进系统及其喷管流场的初步研究[J].推进技术,2005,26(6):495-498. 被引量:11
  • 2吴其芬 陈伟芳.高温稀薄气体热化学非平衡流动的DSMC方法[M].国防科技大学出版社,..
  • 3GEORGE E K,Ali Beskok[M].Micro Flows,2001.
  • 4IAIN K.BOYED Y J,JEFF V B.Particle simula-tions of helium microthruster flows[J].Journal of Spacecraft and Rockets,1994,31(2).
  • 5GENNADY N M,MIKNAIL S I.Numerical study of 2D/3D micronozzle flows,Rearfied Gas Dynamics[A].22nd International Symposium[C].Sydney,Australia,2000.
  • 6BIRD G A.Molecular Gas Dynamics and Direct Simulation of Gas Flow[M].Clarendon,Oxford,1994.
  • 7MICHAEL M M,ANDREW D K.Micro-Propulsion for Small Spacecraft[M].Volume 187,Progress in Astronautics and Aeronautics,June,2000.
  • 8WU Qi-fen,CHEN Wei-fang.DSMC Method on High Temperature Rarefied Gas Thermo-chemistry Non-equilibrium Flow[M].Beijing:National University of Defense Technology Press,1999.(in Chinese)
  • 9Bayt R.Analysis fabrication and testing of MEMS-based micropropulsion system[R].Massachusetts Institute of Technology,1999.
  • 10Liou W W,Fang Y.Implicit boudare conditions for direct simulation monte carlo method in MEMS flow predictions[J].Computer Modeling in Engineering & Science,2000,(4).

共引文献18

同被引文献19

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部