摘要
探讨歼八某型机体改型的可能性,使歼八某型机体由二代战机平台提升至三代战机平台。主要的改进有:飞行过载由7 g提升至8 g或更大,以提高飞行机动性能;作战半径由×××km提升至××××km以上;机翼下表面导弹挂点增加到8个。由于机体结构修改范围不大,因而,继承原歼八某型飞机已有可用成果,可以做到省力、省钱、省时,使歼八某型飞机在短时间内挤入第三代战机的行列。
In this paper a possibility of airframe modification for some type of F-8 aircraft is approached so as to elevate the airframe from the combat aircraft of second generations to the three generations. The principal modifications are as follows： the flight g-load is improved from 7g to 8g or larger in order to enhance the maneuver performance of flight; the action radius is raised from xxx km to xxxx km and above; the store stations on a lower surface of the wing are increased to 8 positions. Because of the modification range of an airframe structure is not more, the original aircraft structure can be continued to use so that save time, manpower and cost would make some type of F-8 aircraft get to the three generation of combat aircrafts within a short period of time.
出处
《飞机设计》
2009年第6期24-27,共4页
Aircraft Design
关键词
改型
机动性
作战半径
导弹
modification
maneuverability
action radius
missile
