期刊文献+

钢铁晶粒超细化方法及其研究进展 被引量:8

Grain Ultra-refinement and Its Development in Steels
下载PDF
导出
摘要 综述了目前钢铁材料的各种晶粒细化方法、原理及其研究动态,展望了钢铁材料晶粒细化技术的研究前景,以期对新一代钢铁材料的研究和开发提供理论指导。分析认为今后钢铁晶粒超细化技术的研究方向主要有2个方面:一是继续深入讨论和探索晶粒超细化机理以及超细晶粒材料结构与性能的关系;二是开发适宜于工业化生产的钢铁晶粒超细化技术。 The grain refinement methods, its principles and its present research development are summarized,and the prospect of the iron and steels grain refinement technique is also forecasted. The purpose of the present work is to afford theoretical guideline for the research and development of the new generation iron and steel materials. It's believed that the following research directions may be the future exploring directions of the iron and steel materials grain refinement.: one is to investigate the grain refinement mechanisms and the relationship between the properties and the microstructures of the uttrafine-grained materials, and the other is to develop new grain refinement technique that could be industrially applied.
作者 韩宝军 徐洲
出处 《材料导报》 EI CAS CSCD 北大核心 2010年第1期99-103,共5页 Materials Reports
基金 国家自然科学基金(50471017)
关键词 晶粒 钢铁 超细化 grain, iron and steels, ultrafining
  • 相关文献

参考文献40

  • 1Eghbali B, Ahdollah-zadeh A. Strain-induced transformation in a low carbon microalloyed steel during hot compression test [J]. Scripta Mater, 2006,54(6) : 1205.
  • 2Branislav Hadzima, Milos Janecek, et al. Microstructure and corrosion properties of ultrafine-grained interstitial free steel [J]. Mater Sci Eng A,2007,462(1-2):243.
  • 3Okayasu M, Sato K, Mizuno M, et al. Fatigue properties of ultra-fine grained dual phase ferrite/martensite low carbon steel [J]. Int J Fatigue, 2008,30(8) : 1358.
  • 4Song R, Ponge D, Raabe D,et al. Microstructure and crystallographic texture of an ultrafine grained C-Mn steel and their evolution during warm deformation and annealing [J]. Acta Mater, 2005,53(3) : 845.
  • 5Ueji R, Fujiib H, Cui L,et al. Friction stir welding of ultrafine grained plain low-carbon steel formed by the martensite process [J]. Mater Sci Eng A,2006,423(1-2):324.
  • 6Zhao Mingchun, Hanamura Toshihiro, et al. Grain growth and Hall-Petch relation in dual-sized ferrite/cemen-tite steel with nano-sized eementite particles in a heteroge-neous and dense distribution [J]. Scripta Mater, 2006,54(6) : 1193.
  • 7Bouaziz O, Allaina S, Scott C. Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels [J]. Scripta Mater,2008,58(6) : 484.
  • 8林武,张希旺,赵延阔,李红英.Q345钢奥氏体连续冷却转变曲线(CCT图)[J].材料科学与工艺,2009,17(2):247-250. 被引量:23
  • 9夏政海,吴清明.微合金元素Ti对20CrMnTi齿轮钢质量的影响[J].特殊钢,2008,29(4):45-46. 被引量:9
  • 10陈永利,罗登,陈炳张,董立国,朱伏先.新型细晶强化Q460级宽厚板的TMCP工艺研究[J].武汉科技大学学报,2009,32(2):142-145. 被引量:5

二级参考文献91

共引文献108

同被引文献94

引证文献8

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部