期刊文献+

降低医用钛合金弹性模量的方法 被引量:3

Research on Decreasing Titanium Alloy's Elastic Modulus for Biomedical Application
下载PDF
导出
摘要 具有良好生物相容性、耐腐蚀性和力学强度的钛合金是近年来人体硬组织替代材料的研究热点。如何降低钛合金的弹性模量,进一步提高其生物力学相容性已受到国内外科研工作者的重点关注。综述了国内外在降低钛合金弹性模量方面的研究进展,对如何进一步降低钛合金弹性模量提出了建议。 Titanium alloys are the hotspot of research on substitute material for human hard tissues because of their excellent mechanical properties, corrosion resistance and biocompatibility. Intense focus has been put on the improvement of their hiocompatibility by decreasing its elastic modulus. An overview of the research progress about ways to decrease titanium alloy's elastic modulus is provided, and some advices of further research on decreasing elastic modulus of titanium alloy are also presented.
作者 王蓉莉 李卫
出处 《材料导报》 EI CAS CSCD 北大核心 2010年第5期128-131,135,共5页 Materials Reports
基金 广东省科技计划重点引导项目(2008B010600044 2006B35801001)
关键词 钛合金 生物力学相容性 弹性模量 Ti alloy, biomechanical compatibility, elastic modulus
  • 相关文献

参考文献28

  • 1Niinomi Mitsuo. Mechanical biocompatibilities of titanium alloys for biomedical applications[J]. J Mechanical Behavior of Biomed Mater, 2008,1 (1) : 30.
  • 2Genfen A. Computational simulations of stress shielding and bone resorption around existing and computer-designed orthopedic screws[J]. Med Biol Eng Comput,2002(40) :311.
  • 3Genfen A. Optimizing the biomechanical compatibility of orthopedic screws for bone fracture fixation[J]. Med Eng Phys, 2002 (24) : 337.
  • 4Lopez M F, Gutierrez A, Jimenez J A. Surface characterization of new non-toxic titanium alloys for use as biomaterials [J]. Surf Sci,2001,482(1) :300.
  • 5毛彭龄.两相钛合金的相变特征和热处理规范[J].上海钢研,1995(3):50-58. 被引量:16
  • 6Matsumoto Hiroaki, Watanabe Sadao, Hanada Shuji. α'martensite Ti-V-Sn alloys with low Young's modulus and high strength[J]. Mater Sci Eng A,2007(448):39.
  • 7常辉,周廉,张廷杰.钛合金固态相变的研究进展[J].稀有金属材料与工程,2007,36(9):1505-1510. 被引量:34
  • 8Collings E W. The physical metallurgy of titanium alloys [M]. Metals Park OH : ASM Press, 1984 : 32.
  • 9Niinomi Mitsuo. Mechanical properties of biomedical titanium alloys[J]. Mater Sci Eng A,1998(243):231.
  • 10于振涛,周廉,牛金龙,袁思波,贺新杰,皇甫强,张亚锋.合金元素、加工与热处理对医用β型钛合金力学性能的影响及微观分析[J].稀有金属,2007,31(4):416-419. 被引量:11

二级参考文献88

共引文献170

同被引文献56

  • 1周宇,杨贤金,崔振铎.新型医用β-钛合金的研究现状及发展趋势[J].金属热处理,2005,30(1):47-50. 被引量:40
  • 2马楚凡,李冬梅,李贺军,蒋百灵,张丽君.微弧氧化方法在钛表面注入钙磷离子及对成骨细胞早期附着的影响[J].第一军医大学学报,2005,25(1):62-65. 被引量:11
  • 3张廷杰.钛合金相变的电子显微镜研究(Ⅲ)——钛合金中的马氏体相变[J].稀有金属材料与工程,1989,18(4):71-78. 被引量:19
  • 4Geetha M, Singh A K, Asokamani R, et al. Ti based biomaterials, the ultimate choice for orthopaedic implants-A review[J]. Progr Mater Sei, 2009,54(3) : 397.
  • 5Ikehata H, Nagasako N, Furuta T, et al. First-principles calculations for development of low elastic modulus Ti alloys [J]. Phys Rev B,2004,70(17):4113.
  • 6Sun J, Yao Q, Xing H, et al. Elastic properties of beta, alpha" and omega metastable phases in Ti-Nb alloy from first- principles[J]. J Phys Condensed Matter, 2007,19 (48) : 6215.
  • 7Laheurte P, Eberhardt A, Philippe M J. Influence of the microstructure on the pseudoelasticity of a metastable beta titanium alloy[J]. Mater Sci Eng A,2005,396(1-2):223.
  • 8Matlakhova L A, Matlakhov A N, Monteiro S N, et al. Properties and structural characteristics of Ti-Nb-Al alloys [J]. Mater Sci Eng A,2005,393(1-2):320.
  • 9Mantani Y, Tajima M. Effect of ageing on internal friction and elastic modulus of Ti-Nb alloys[J]. Mater Sci Eng A, 2006,442(1-2): 409.
  • 10Tane M, Akita S, Nakano T, et al. Low Young's modulus of Ti Nb-Ta-Zr alloys caused by softening in shear moduli c' and c(44) near lower limit of body-centered cubic phase stability[J]. Acta Mater, 2010,58(20): 6790.

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部