期刊文献+

循环流化床锅炉焦炭颗粒燃烧机理研究

Study on Combustion Mechanism of Char Particles in CFB
下载PDF
导出
摘要 以循环流化床锅炉飞灰为研究对象,分析了飞灰的粒径和含碳量分布,并利用扫描电子显微镜观察了不同粒径飞灰的微观形貌。结果表明,循环流化床锅炉飞灰中碳的质量分数最高的区域分布在38-58μm、90-120μm和大于150μm的粒径段,具有峰值特征;且循环流化床锅炉焦炭颗粒的燃尽与燃烧室温度、颗粒的孔隙结构及旋风分离器的性能关系密切。 Taking CFB fly-ash as research object,this paper analyzed the size distribution and carbon content distribution of fly-ash,and characterized the microscopic morphology of the fly-ash of different size with scanning electron microscope.The results show that CFB fly-ash with highest carbon content lies in the range of 38~58 μm,90~120 μm,and 150 μm,exhibiting peah distribution;the burn-out of char pariticles in CFB is closely related to combustion chamber temperature,particle porosity and cyclone performance.
出处 《太原理工大学学报》 CAS 北大核心 2010年第2期194-196,共3页 Journal of Taiyuan University of Technology
关键词 循环流化床锅炉 焦炭颗粒 飞灰 燃烧机理 char fly-ash fractal pore structure circulating fluidized bed(CFB)
  • 相关文献

参考文献7

二级参考文献32

  • 1丘纪华.煤粉在热分解过程中比表面积和孔隙结构的变化[J].燃料化学学报,1994,22(3):316-320. 被引量:48
  • 2王恩元,何学秋.煤岩等多孔介质的分形结构[J].焦作工学院学报,1996,15(4):19-23. 被引量:26
  • 3金燕,硕士学位论文,1995年
  • 4于龙,硕士学位论文,1989年
  • 5朱皑强(译),煤粉燃烧动力学,1986年
  • 6国井大藏,流态化工程,1977年
  • 7Kang S G. Fundamental Studies of Mineral Matter Transformation During Pulverized Coal Combustion: Residual Ash Formation. [Ph. D. Thesis]. MIT, USA: Dept of Chemical Engineering, 1991
  • 8Sarofim A F, Helble J J. Mechanisms of Ash and Deposit Formation. Proceedings of Engineering Foundation Conference on the Impact of Ash Deposition on Coal Fired Plants. Taylor & Francis, 1993. 567-582
  • 9Kang S G, Sarofim A F, Beer J E. Effect of Char Structure on Residual Ash Formation During Pulverized Coal Combustion. In: 24t h Symposium (International) on Combustion. The Combustion Institute, 1992. 1153-1159
  • 10Baxter L L. The Evolution of Mineral Particle Size Distributions During Early Stages of Coal Combustion. Prog Energy Combust Sci, 1990, 16:261-266

共引文献79

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部