期刊文献+

锌金属配合物BFHQZn的白色有机电致发光器件 被引量:4

White organic light-emitting devices based on BFHQZn as emitter
原文传递
导出
摘要 利用新型荧光染料2-溴-4-氟苯乙烯-8-羟基喹啉锌(BFHQZn,(E)-2-(2-bromo-4-fluorostyryl)quinolato-Zinc)的电致发光(EL)特性,制备了非掺杂型的有机电致白光器件(WOLED)。器件的结构为ITO/CuPc(10nm)/NPBX(25 nm)/BFHQZn(18 nm)/NPBX(xnm)/BCP(10 nm)/Alq3((47-x)nm)/LiF(0.5 nm)/Al,当x为12时,得到了色度最好和效率最大的WOLED,最大电流效率为1.11 cd/A(at 10 V),最大的亮度为817 cd/m2(at 15 V),当驱动电压从7 V(启亮)升高到15 V(最高亮度)时,器件色坐标由(0.32,038)改变为(0.30,0.28)。 We investigate the electroluminescence(EL) characteristics of a novel yellow emitting material:(E)-2-(2-bromo-4-fluorostyryl)quinolato-Zinc(BFHQZn).Based on this performance,series of un-doping white OLEDs are fabricated.The white device are fabricated as follows:ITO/CuPc(10 nm)/NPBX(25 nm)/BFHQZn(18 nm)/NPBX(x nm)/BCP(10 nm)/Alq3((47-x)nm) /LiF(0.5 nm)/Al,when NPBX thickness is 12 nm,white OLEDs are obtained with the maximum luminance of 817 cd/m^2(at 15 V) and the maximum luminous efficiency of 1.11 cd/A(at 10 V),respectively.The Commission International de L′Eclairage(CIE) coordinates varies from(0.32,0.38)at 7 V to(0.30,0.28) at 15 V.With the good EL performance,this kind of WOLED is particular suited for working as the backlight in LCD in combination with color filters to achieve the full color display.
出处 《光电子.激光》 EI CAS CSCD 北大核心 2010年第3期340-343,共4页 Journal of Optoelectronics·Laser
基金 国家自然科学基金资助项目(20471020 20671036) 国家青年基金资助项目(10804036) 吉林省科技发展计划资助项目(20050523 20080528) 吉林省教育厅科研计划资助项目(吉教科合字[2003]第25号 吉教科合字[2004]第54号 吉教科合字[2009]第192号) 广东省科技资助项目(2006A10801002)
关键词 白色有机电致发光器件(WOLED) 发光材料 BFHQZn white organic light-emitting devices(WOLEDs) emitting material BFHQZn
  • 相关文献

参考文献8

二级参考文献85

共引文献42

同被引文献70

  • 1Ouerfelli J,Djobo S O, Bernede J C, et al. Organic light emitting diodes using fluorine doped tin oxide thin films, deposited by chemical spray pyrolysis,as anode[J]. Materials Chemistry and Physics,2008 ,112(1) : 198-201.
  • 2Helander M G, Wang, Z B, Greiner, M T, et al. Oxidized gold thin films, an effective material for high-performance flexible organic optoelectronics [J].Advanced Materials, 2010, 22 (18) :2037-2040.
  • 3Wang Z B,Helander M G,Qiu J,et al. Direct hole injection in to 4,4"-N, N'-dicarbazole-biphenyl.. A simple pathway to achieve efficient organic light emitting diodes [J]. Journal of Applied Physics, 2010,108: 024510-024513.
  • 4Lee H, Park I,Kwak J, et al. Improvement of electron injection in inverted bottom-emission blue phosphorescent organic light emitting diodes using zinc oxide nanoparticles [J]. Applied Physics Letters,20]0,96 : 153306-153308.
  • 5Zou Y, Deng Z, Lv Z, et al. Reduction of driving voltage in organic light-emitting diodes with molybdenum trioxide in CuPc/ NPB interface[J].Journal of Luminescence,2010,130(6) :959- 962.
  • 6Tokito S,Noda K,and Taga Y. Metal oxides as a hole-injecting layer for an organic electroluminescent device[J].J. Phys. D: Appl. Phys. 1996,29:2750-2752.
  • 7Zhang H, Choy W. Transparent AI/WO3/Au film as anode for high efficiency organic light-emitting diodes[J].Org. Electron, 2008,9(6) :964-967.
  • 8Krger M, Hamwi S, Meyer J, et al. P-type doping of organic wide band gap materials by transition metal oxides: A casestudy on molybdenum trioxide[J].Organic Electronics, 2009, 10(6) :932-938.
  • 9Liao L S,Klubek K P. Power efficiency improvement in a tandem organic light-emitting diode[J]. Appl. Phys. Lett, 2008, 92:223311-223313.
  • 10Frank P,Koch N, Koini M, et al. Layer growth and desorption kinetics of a discoid molecular acceptor on Au(1 1 1)[J]. Chem. Appl. Phys. Lett,2009,473 : 321-323.

引证文献4

二级引证文献16

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部